Re: Probably right, but -- Brian Hahn in SW Wisconsin -- Wednesday, 27 February 2008, at 8:15 p.m.
1 message
Re: Big Burl -- Brian Hahn in SW Wisconsin -- Wednesday, 27 February 2008, at 8:22 p.m.
3 messages -- Newest posted Wednesday, 27 February 2008, at 11:45 p.m.
Re: Sorta looks like fireworks to me..... -- Darrell Feltmate -- Wednesday, 27 February 2008, at 9:19 p.m.
3 messages -- Newest posted Thursday, 28 February 2008, at 6:25 p.m.
Re: Big Burl -- Jim Terry -- Wednesday, 27 February 2008, at 9:27 p.m.
1 message
Re: Big Burl -- georgetroy -- Wednesday, 27 February 2008, at 10:24 p.m.
1 message
A 6' x 8' cherry burl???? -- Carole Valentine -- Wednesday, 27 February 2008, at 10:32 p.m.
2 messages -- Newest posted Thursday, 28 February 2008, at 7:54 a.m.
Re: Big Burl -- Mark Williamson -- Wednesday, 27 February 2008, at 10:45 p.m.
1 message
Serious Sycamore *PIC* -- Mark Mandell - Gone Round In Jersey -- Wednesday, 27 February 2008, at 11:22 p.m.
31 messages -- Newest posted Friday, 29 February 2008, at 7:24 a.m.
New PM3520B lathe - Comments -- David - Indianapolis -- Wednesday, 27 February 2008, at 11:49 p.m.
26 messages -- Newest posted Friday, 29 February 2008, at 2:52 p.m.
Just hollow it! -- Mike Schwing from Md. -- Thursday, 28 February 2008, at 7:26 a.m.
1 message
Re: Toney- that is an awesome first..... -- Jamie Donaldson -- Thursday, 28 February 2008, at 9:50 a.m.
2 messages -- Newest posted Thursday, 28 February 2008, at 12:06 p.m.
Maybe -- Dave Smith, Longview, WA -- Thursday, 28 February 2008, at 10:29 a.m.
1 message
new benifit auction -- Thomas S Stockton -- Thursday, 28 February 2008, at 11:03 a.m.
1 message
What shape are you gonna make? :-) -- steve antonucci -- Thursday, 28 February 2008, at 11:53 a.m.
2 messages -- Newest posted Thursday, 28 February 2008, at 8:35 p.m.
SawMill Creek ?? -- Bill Hale / The Wood Spinner -- Thursday, 28 February 2008, at 9:01 p.m.
29 messages -- Newest posted Saturday, 1 March 2008, at 1:19 p.m.
Cherry burl lidded box -- Curt Fuller -- Thursday, 28 February 2008, at 9:29 p.m.
4 messages -- Newest posted Friday, 29 February 2008, at 1:48 a.m.
Bill Hale, sorry I missed you. -- Dave Smith, Longview, WA -- Friday, 29 February 2008, at 12:05 p.m.
4 messages -- Newest posted Friday, 29 February 2008, at 5:29 p.m.
walnut and checking -- Mark Paulley -- Friday, 29 February 2008, at 12:23 p.m.
11 messages -- Newest posted Saturday, 1 March 2008, at 8:23 a.m.
.007" revisited... -- Mike Jones, Redding, CA -- Friday, 29 February 2008, at 2:42 p.m.
10 messages -- Newest posted Friday, 29 February 2008, at 11:04 p.m.
Scrap wood (small pieces) -- Marvin Ewing -- Friday, 29 February 2008, at 3:21 p.m.
7 messages -- Newest posted Friday, 29 February 2008, at 9:52 p.m.
Vacuum Chucking -- Peter Charles Fagg (UK) -- Friday, 29 February 2008, at 5:18 p.m.
5 messages -- Newest posted Saturday, 1 March 2008, at 10:49 a.m.
3/4" x 10 thread, need help -- jeff -- Friday, 29 February 2008, at 5:19 p.m.
5 messages -- Newest posted Saturday, 1 March 2008, at 8:44 a.m.
Yet Another Way To Fell A Tree... *LINK* -- Dave Winters -- Friday, 29 February 2008, at 6:07 p.m.
6 messages -- Newest posted Sunday, 2 March 2008, at 8:54 p.m.
chainsaw sharpening, help needed -- gary s clarke -- Friday, 29 February 2008, at 8:02 p.m.
12 messages -- Newest posted Saturday, 1 March 2008, at 12:04 p.m.
50% off on Varigrind *LINK* -- Gordon Seto -- Friday, 29 February 2008, at 9:11 p.m.
18 messages -- Newest posted Saturday, 15 March 2008, at 4:24 p.m.
PM3520B - Comments Cont. *PIC* -- David - Indianapolis -- Friday, 29 February 2008, at 10:17 p.m.
5 messages -- Newest posted Sunday, 2 March 2008, at 7:30 p.m.
OT: Metal cutting question -- steve antonucci -- Saturday, 1 March 2008, at 9:03 a.m.
21 messages -- Newest posted Wednesday, 5 March 2008, at 5:00 p.m.
Serious Sycamore Part Deux *PIC* -- Mark Mandell - Gone Round In Jersey -- Saturday, 1 March 2008, at 12:03 p.m.
7 messages -- Newest posted Sunday, 2 March 2008, at 8:20 a.m.
"Things to Make" list -- Bill Neddow -- Saturday, 1 March 2008, at 12:10 p.m.
5 messages -- Newest posted Saturday, 1 March 2008, at 6:32 p.m.
MESQUITE GLOAT *PIC* -- Bill Hale / The Wood Spinner -- Saturday, 1 March 2008, at 1:02 p.m.
11 messages -- Newest posted Monday, 3 March 2008, at 9:15 a.m.
Turning Mimosa... -- Wally Dickerman in Arizona -- Saturday, 1 March 2008, at 2:36 p.m.
23 messages -- Newest posted Sunday, 2 March 2008, at 8:01 p.m.
Echoes of My Dreams: Hawaii (1) *PIC* -- bowlman -- Saturday, 1 March 2008, at 6:16 p.m.
2 messages -- Newest posted Saturday, 1 March 2008, at 6:18 p.m.
Tribal Patterns (1) *PIC* -- bowlman -- Saturday, 1 March 2008, at 6:35 p.m.
9 messages -- Newest posted Monday, 3 March 2008, at 2:51 p.m.
PSI 4 pc grinding system -- elliott -- Saturday, 1 March 2008, at 8:05 p.m.
4 messages -- Newest posted Sunday, 2 March 2008, at 9:19 a.m.
First Platter *PIC* -- Chris DiCiaccio -- Saturday, 1 March 2008, at 8:32 p.m.
5 messages -- Newest posted Sunday, 2 March 2008, at 9:43 a.m.
OT.- Nikon Capture NX -- Jorge Castaneda~Downeast Maine -- Sunday, 2 March 2008, at 10:26 a.m.
12 messages -- Newest posted Monday, 3 March 2008, at 8:54 a.m.
Turning first plate -- Craig -- Sunday, 2 March 2008, at 11:00 a.m.
7 messages -- Newest posted Sunday, 2 March 2008, at 11:28 p.m.
Help with Club Video System -- RK in Milwaukee -- Sunday, 2 March 2008, at 3:02 p.m.
11 messages -- Newest posted Monday, 3 March 2008, at 7:46 p.m.
OT Any Microsoft Office Experts? OT -- Barbara Gill, Remlik VA -- Sunday, 2 March 2008, at 5:53 p.m.
16 messages -- Newest posted Monday, 3 March 2008, at 6:45 p.m.
"Poet's Walk" *PIC* -- Keith Tompkins -- Sunday, 2 March 2008, at 8:42 p.m.
4 messages -- Newest posted Monday, 3 March 2008, at 6:57 p.m.
new lathe -- jimtex -- Sunday, 2 March 2008, at 9:29 p.m.
10 messages -- Newest posted Tuesday, 4 March 2008, at 8:22 a.m.
12" Disc Sander -- Bryan from Oregon -- Sunday, 2 March 2008, at 10:12 p.m.
20 messages -- Newest posted Tuesday, 4 March 2008, at 10:43 p.m.
NEW Shop Shots -- David Yoho -- Monday, 3 March 2008, at 8:21 a.m.
1 message
Marion Randolph *PIC* -- john lucas -- Monday, 3 March 2008, at 12:55 p.m.
8 messages -- Newest posted Monday, 3 March 2008, at 9:06 p.m.
Norm Abrams -- Ron in Drums PA -- Monday, 3 March 2008, at 2:26 p.m.
21 messages -- Newest posted Wednesday, 5 March 2008, at 8:57 p.m.
Traveling Down Memory Lane -- Barbara Gill, Remlik VA -- Monday, 3 March 2008, at 3:10 p.m.
19 messages -- Newest posted Friday, 7 March 2008, at 12:27 p.m.
Chain sharpener -- Bill Hale / The Wood Spinner -- Monday, 3 March 2008, at 4:15 p.m.
9 messages -- Newest posted Tuesday, 4 March 2008, at 12:49 p.m.
Pith - The Pits!? -- charlie belden -- Monday, 3 March 2008, at 9:12 p.m.
15 messages -- Newest posted Wednesday, 5 March 2008, at 2:56 p.m.
Mom, would you make me a lamp? *PIC* -- Molly Winton -- Monday, 3 March 2008, at 10:53 p.m.
20 messages -- Newest posted Thursday, 6 March 2008, at 10:33 p.m.
Sharpening an Elsworth Gouge -- Steve in NC -- Tuesday, 4 March 2008, at 4:56 a.m.
16 messages -- Newest posted Wednesday, 5 March 2008, at 8:54 p.m.
USPS new box -- Bill Hale / The Wood Spinner -- Tuesday, 4 March 2008, at 10:36 a.m.
14 messages -- Newest posted Wednesday, 5 March 2008, at 12:55 p.m.
Sears router Crafter -- john lucas -- Tuesday, 4 March 2008, at 12:26 p.m.
5 messages -- Newest posted Tuesday, 4 March 2008, at 7:33 p.m.
WOW invite -- jeff ferguson -- Tuesday, 4 March 2008, at 4:35 p.m.
3 messages -- Newest posted Wednesday, 5 March 2008, at 8:56 a.m.
"Grandma's Vase" 5317 *PIC* -- Bruce Forrest -- Tuesday, 4 March 2008, at 5:28 p.m.
5 messages -- Newest posted Wednesday, 5 March 2008, at 7:41 a.m.
Steady Rest Plan *NM* -- Mitch Cholewinski -- Tuesday, 4 March 2008, at 9:25 p.m.
1 message
Steady Rest -- Mitch Cholewinski -- Tuesday, 4 March 2008, at 9:32 p.m.
7 messages -- Newest posted Wednesday, 5 March 2008, at 6:56 p.m.
Half-size Djembe *PIC* -- Brian Hahn in SW Wisconsin -- Wednesday, 5 March 2008, at 6:57 a.m.
15 messages -- Newest posted Wednesday, 5 March 2008, at 8:50 p.m.
tool extension from your jig -- john lucas -- Wednesday, 5 March 2008, at 9:13 a.m.
18 messages -- Newest posted Wednesday, 5 March 2008, at 10:24 p.m.
3-Sided "X" Vase *PIC* -- Brian Hahn in SW Wisconsin -- Wednesday, 5 March 2008, at 11:01 a.m.
7 messages -- Newest posted Wednesday, 5 March 2008, at 10:46 p.m.
Olympus Stylus 1010 -- Jim Rutten -- Wednesday, 5 March 2008, at 11:55 a.m.
1 message
Bob Rosand Demo/Workshop -- Mike Cunningham (Cape May NJ) -- Wednesday, 5 March 2008, at 1:54 p.m.
1 message
"M" is for Mad Hatter *PIC* -- charlie belden -- Wednesday, 5 March 2008, at 5:49 p.m.
2 messages -- Newest posted Thursday, 6 March 2008, at 4:40 p.m.
1 3/8" Lacer Skew: metal types -- Joe Pack -- Wednesday, 5 March 2008, at 7:20 p.m.
25 messages -- Newest posted Saturday, 8 March 2008, at 11:54 p.m.
Skew from old file? -- Joe Pack -- Wednesday, 5 March 2008, at 7:50 p.m.
8 messages -- Newest posted Thursday, 6 March 2008, at 10:09 p.m.
Doug Thompson Tools.... -- Wally Dickerman in Arizona -- Wednesday, 5 March 2008, at 8:56 p.m.
15 messages -- Newest posted Friday, 7 March 2008, at 1:20 a.m.
Thank-you Steve Antonucci -- Karen F. -- Wednesday, 5 March 2008, at 10:55 p.m.
4 messages -- Newest posted Thursday, 6 March 2008, at 4:25 p.m.
Sometimes You Get Lucky (1 of 2) *PIC* -- charlie belden -- Thursday, 6 March 2008, at 2:16 a.m.
2 messages -- Newest posted Thursday, 6 March 2008, at 7:46 a.m.
messersmith woodworker -- ALEX STEWART -- Thursday, 6 March 2008, at 11:06 a.m.
1 message
Vintage Lathe Restoration *PIC* -- David Miller from Iowa -- Thursday, 6 March 2008, at 12:42 p.m.
13 messages -- Newest posted Friday, 7 March 2008, at 1:20 p.m.
Tailstock Locking Plate -- keith zimmerman, Normal, IL -- Thursday, 6 March 2008, at 1:15 p.m.
11 messages -- Newest posted Friday, 14 March 2008, at 11:31 a.m.
***Ted needs help by 5pm today (ET)*** -- Ellis Walentine -- Friday, 7 March 2008, at 2:44 p.m.
5 messages -- Newest posted Friday, 7 March 2008, at 6:56 p.m.
Drain your compressor every day? -- Jim K in Trappe, PA -- Friday, 7 March 2008, at 2:55 p.m.
27 messages -- Newest posted Friday, 18 April 2008, at 5:22 p.m.
Neat Trick for Hunter Tools... -- Steve Russell -- Friday, 7 March 2008, at 8:48 p.m.
8 messages -- Newest posted Saturday, 8 March 2008, at 3:47 p.m.
Need Electrical Info -- jwoodwright -- Friday, 7 March 2008, at 11:13 p.m.
14 messages -- Newest posted Monday, 10 March 2008, at 2:45 p.m.
Jumbo Jaw Buttons............. -- Jesper, Denmark -- Saturday, 8 March 2008, at 3:31 a.m.
13 messages -- Newest posted Monday, 10 March 2008, at 2:52 a.m.
Right Onnnnnn, Jamie! *PIC* -- Mark Mandell - Gone Round In Jersey -- Saturday, 8 March 2008, at 7:58 a.m.
16 messages -- Newest posted Sunday, 9 March 2008, at 8:29 a.m.
sharpening -- jimtex -- Saturday, 8 March 2008, at 11:12 a.m.
6 messages -- Newest posted Sunday, 9 March 2008, at 9:23 a.m.
Shift Knob *PIC* -- R Acuna -- Saturday, 8 March 2008, at 4:45 p.m.
5 messages -- Newest posted Sunday, 9 March 2008, at 12:55 p.m.
Don Pencil -- Wilford Bickel -- Saturday, 8 March 2008, at 7:24 p.m.
2 messages -- Newest posted Saturday, 8 March 2008, at 7:52 p.m.
Powermatic 3520B lathe -- don lewonczyk -- Saturday, 8 March 2008, at 8:11 p.m.
11 messages -- Newest posted Sunday, 16 March 2008, at 2:13 p.m.
WoodFast lathe tailstock hand wheel -- Mark Paulley -- Sunday, 9 March 2008, at 9:53 a.m.
8 messages -- Newest posted Sunday, 9 March 2008, at 10:57 p.m.
New turning, well.... *PIC* -- mfoster -- Sunday, 9 March 2008, at 9:58 a.m.
6 messages -- Newest posted Sunday, 9 March 2008, at 11:13 p.m.
JSSG-10 Jet Slow Speed Grinder -- Dustmaker Mike -- Sunday, 9 March 2008, at 4:02 p.m.
3 messages -- Newest posted Sunday, 9 March 2008, at 6:27 p.m.
Central Ohio Woodturners - Rosand ??? -- Ed Moore in SW Virginia -- Sunday, 9 March 2008, at 6:05 p.m.
3 messages -- Newest posted Monday, 10 March 2008, at 10:52 a.m.
Ellsworth gauge pull cut tear-outs -- Aage Rendalen -- Sunday, 9 March 2008, at 6:05 p.m.
17 messages -- Newest posted Tuesday, 11 March 2008, at 10:15 a.m.
Thompson tools and Tormek ??? -- Ed Moore in SW Virginia -- Sunday, 9 March 2008, at 7:16 p.m.
19 messages -- Newest posted Tuesday, 11 March 2008, at 11:33 a.m.
Box Maker's SIN at AAW Symposium -- Mike Stafford -- Sunday, 9 March 2008, at 8:27 p.m.
21 messages -- Newest posted Tuesday, 11 March 2008, at 11:29 a.m.
Thanks John Kyler -- HeatherA in AK -- Monday, 10 March 2008, at 1:54 a.m.
1 message
Cracking - T/R Ratio A Predictor? *LINK* -- charlie belden -- Monday, 10 March 2008, at 3:16 a.m.
11 messages -- Newest posted Wednesday, 12 March 2008, at 9:30 a.m.
Drum Sanding Alternatives -- Justin Fields -- Monday, 10 March 2008, at 8:00 a.m.
5 messages -- Newest posted Tuesday, 11 March 2008, at 8:03 a.m.
Ron Grant Passing -- Dustmaker Mike -- Monday, 10 March 2008, at 9:04 a.m.
4 messages -- Newest posted Monday, 10 March 2008, at 5:11 p.m.
Photo box -- Dennis Yoder -- Monday, 10 March 2008, at 11:56 a.m.
6 messages -- Newest posted Monday, 10 March 2008, at 8:47 p.m.
Re: Western Red Cedar -- Justin Fields -- Monday, 10 March 2008, at 12:20 p.m.
1 message
Re: Western Red Cedar -- Allen Neighbors -- Monday, 10 March 2008, at 1:40 p.m.
4 messages -- Newest posted Wednesday, 12 March 2008, at 10:10 a.m.
more cupcakes *PIC* -- john lucas -- Monday, 10 March 2008, at 2:18 p.m.
11 messages -- Newest posted Tuesday, 11 March 2008, at 3:27 p.m.
Question on Harvesting a Burl -- Philip Morris -- Monday, 10 March 2008, at 3:09 p.m.
11 messages -- Newest posted Thursday, 13 March 2008, at 5:01 p.m.
Red Oak Limb -- Wayne Carson "TX" -- Monday, 10 March 2008, at 4:03 p.m.
8 messages -- Newest posted Tuesday, 11 March 2008, at 12:08 p.m.
Re: Western Red Cedar-don't do it. *NM* -- georgetroy -- Monday, 10 March 2008, at 7:28 p.m.
2 messages -- Newest posted Tuesday, 11 March 2008, at 11:29 a.m.
Dyed Spalted -- MikefromTn. -- Monday, 10 March 2008, at 10:02 p.m.
14 messages -- Newest posted Tuesday, 11 March 2008, at 2:48 p.m.
Small Oak Bowl *PIC* -- Bill Noce - Jefferson, Ohio -- Tuesday, 11 March 2008, at 12:44 a.m.
2 messages -- Newest posted Tuesday, 11 March 2008, at 1:03 a.m.
Small Oak Bowl side view *NM* *PIC* -- Bill Noce - Jefferson, Ohio -- Tuesday, 11 March 2008, at 12:52 a.m.
2 messages -- Newest posted Tuesday, 11 March 2008, at 11:56 a.m.
Jumbo Jaw Button solution........... -- Jesper, Denmark -- Tuesday, 11 March 2008, at 7:15 a.m.
7 messages -- Newest posted Thursday, 13 March 2008, at 2:55 a.m.
Colored wood -- ben d. -- Tuesday, 11 March 2008, at 8:58 a.m.
5 messages -- Newest posted Tuesday, 11 March 2008, at 3:04 p.m.
Man's best friend- Really OT -- Mike Stafford -- Tuesday, 11 March 2008, at 1:02 p.m.
13 messages -- Newest posted Tuesday, 11 March 2008, at 10:17 p.m.
Blue Denim Pine -- Marc Block -- Tuesday, 11 March 2008, at 7:59 p.m.
15 messages -- Newest posted Saturday, 15 March 2008, at 11:20 a.m.
CET/Glaser Gouges ? ? ? -- Barry Turner -- Tuesday, 11 March 2008, at 9:47 p.m.
25 messages -- Newest posted Sunday, 16 March 2008, at 11:22 p.m.
sanders -- jimtex -- Tuesday, 11 March 2008, at 10:46 p.m.
16 messages -- Newest posted Wednesday, 12 March 2008, at 9:53 p.m.
Dying help needed. -- Cyril Griesbach -- Wednesday, 12 March 2008, at 12:40 p.m.
5 messages -- Newest posted Wednesday, 12 March 2008, at 11:42 p.m.
Gavel specs -- Molly Winton -- Wednesday, 12 March 2008, at 1:13 p.m.
6 messages -- Newest posted Friday, 14 March 2008, at 12:42 p.m.
Macadamia Wood -- LP Skendzel -- Wednesday, 12 March 2008, at 4:42 p.m.
7 messages -- Newest posted Sunday, 16 March 2008, at 1:12 p.m.
Nova midi chuck problem -- Mike Cunningham (Cape May NJ) -- Wednesday, 12 March 2008, at 5:04 p.m.
5 messages -- Newest posted Tuesday, 18 March 2008, at 11:14 a.m.
SIN Box-Makers Panelist List -- Ed Moore in SW Virginia -- Wednesday, 12 March 2008, at 10:25 p.m.
3 messages -- Newest posted Thursday, 13 March 2008, at 8:36 a.m.
awesome wooden motorcycle *PIC* -- chris rolke -- Wednesday, 12 March 2008, at 10:58 p.m.
4 messages -- Newest posted Thursday, 13 March 2008, at 8:43 p.m.
Thanks for the reminder Molly *PIC* -- Raymond Overman in SC -- Wednesday, 12 March 2008, at 11:46 p.m.
3 messages -- Newest posted Thursday, 13 March 2008, at 12:47 p.m.
Oneway Electrical Info -- jwoodwright -- Thursday, 13 March 2008, at 1:14 a.m.
23 messages -- Newest posted Sunday, 16 March 2008, at 10:48 p.m.
Three phase machines *PIC* -- Doug Thompson near Cleveland -- Thursday, 13 March 2008, at 4:54 a.m.
13 messages -- Newest posted Friday, 14 March 2008, at 10:12 a.m.
gavel mania *PIC* -- John K Jordan -- Thursday, 13 March 2008, at 10:31 a.m.
5 messages -- Newest posted Thursday, 13 March 2008, at 5:39 p.m.
Defective Oneway -- Bill Hale / The Wood Spinner -- Thursday, 13 March 2008, at 5:05 p.m.
2 messages -- Newest posted Thursday, 13 March 2008, at 10:20 p.m.
WoW invitation -- Clancy Courtney -- Thursday, 13 March 2008, at 7:57 p.m.
3 messages -- Newest posted Friday, 14 March 2008, at 2:24 p.m.
Collar for Hollow Form -- Barry Turner -- Thursday, 13 March 2008, at 9:35 p.m.
14 messages -- Newest posted Friday, 14 March 2008, at 9:08 p.m.
New Rikon mini lathe for sale in Classifieds -- Gary Evans Tallassee, TN -- Thursday, 13 March 2008, at 10:17 p.m.
2 messages -- Newest posted Friday, 14 March 2008, at 7:23 p.m.
Mini lathe bench *PIC* -- Jim King -- Friday, 14 March 2008, at 2:33 p.m.
13 messages -- Newest posted Sunday, 16 March 2008, at 11:56 p.m.
OT: Astrophotography *PIC* -- steve antonucci -- Friday, 14 March 2008, at 3:33 p.m.
8 messages -- Newest posted Saturday, 15 March 2008, at 2:14 p.m.
mini goblet photo -- john lucas -- Friday, 14 March 2008, at 5:23 p.m.
21 messages -- Newest posted Sunday, 16 March 2008, at 2:20 p.m.
Woodworking Channel -- Ron in Drums PA -- Friday, 14 March 2008, at 7:11 p.m.
7 messages -- Newest posted Saturday, 15 March 2008, at 4:16 p.m.
Woodturning Magazine -- Larry Simonson -- Saturday, 15 March 2008, at 1:22 a.m.
2 messages -- Newest posted Saturday, 15 March 2008, at 8:54 a.m.
Nothing New Under The Sun? NOT! *LINK* -- charlie belden -- Saturday, 15 March 2008, at 1:32 a.m.
8 messages -- Newest posted Sunday, 16 March 2008, at 7:13 p.m.
Marc Block...blue pine -- Mike Jones, Redding, CA -- Saturday, 15 March 2008, at 2:54 a.m.
1 message
"Cancun" Pen *LINK* -- Eugenio Soto -- Saturday, 15 March 2008, at 8:29 a.m.
2 messages -- Newest posted Saturday, 15 March 2008, at 9:29 a.m.
Something Different *PIC* -- Barbara Gill, Remlik VA -- Saturday, 15 March 2008, at 3:56 p.m.
9 messages -- Newest posted Wednesday, 19 March 2008, at 5:19 a.m.
African Blackwood -- Bill Crommett -- Saturday, 15 March 2008, at 4:10 p.m.
3 messages -- Newest posted Saturday, 15 March 2008, at 9:30 p.m.
Anyone have wood allergies? -- Bruce McElhaney, Spring Lake, Michigan -- Saturday, 15 March 2008, at 4:58 p.m.
25 messages -- Newest posted Wednesday, 19 March 2008, at 8:08 p.m.
Mom's Gavel *PIC* -- Molly Winton -- Saturday, 15 March 2008, at 11:30 p.m.
15 messages -- Newest posted Sunday, 16 March 2008, at 7:33 p.m.
*** From the Cockpit: New Look *** -- Ellis Walentine -- Sunday, 16 March 2008, at 11:52 a.m.
11 messages -- Newest posted Sunday, 16 March 2008, at 8:46 p.m.
50% off Vairgrind. What a Deal -- Bruce McElhaney, Spring Lake, Michigan -- Monday, 17 March 2008, at 5:22 p.m.
2 messages -- Newest posted Monday, 17 March 2008, at 6:05 p.m.
Comfort Tool Rest grip *PIC* -- Gordon Seto -- Monday, 17 March 2008, at 5:25 p.m.
2 messages -- Newest posted Tuesday, 18 March 2008, at 9:28 a.m.
Not the typical bench grinder question -- wilbur -- Monday, 17 March 2008, at 8:33 p.m.
18 messages -- Newest posted Wednesday, 19 March 2008, at 12:43 a.m.
Need 4 spindles turned to match *PIC* -- Jon Martin -- Monday, 17 March 2008, at 9:18 p.m.
3 messages -- Newest posted Monday, 17 March 2008, at 10:12 p.m.
Box Elder fading *PIC* -- john lucas -- Monday, 17 March 2008, at 9:45 p.m.
2 messages -- Newest posted Tuesday, 18 March 2008, at 9:35 a.m.
Countdown to the Abyss 4 days... -- Ned Bulken -- Monday, 17 March 2008, at 10:52 p.m.
7 messages -- Newest posted Friday, 21 March 2008, at 9:30 p.m.
OT: A night without turning... *PIC* -- steve antonucci -- Tuesday, 18 March 2008, at 9:21 a.m.
9 messages -- Newest posted Wednesday, 19 March 2008, at 9:46 a.m.
Removing Glaser Gouge From Handle? -- David Propst -- Tuesday, 18 March 2008, at 11:21 a.m.
19 messages -- Newest posted Wednesday, 19 March 2008, at 3:52 p.m.
NE Spalted Birch *PIC* -- George Van -- Tuesday, 18 March 2008, at 12:37 p.m.
11 messages -- Newest posted Wednesday, 19 March 2008, at 3:41 p.m.
Vase 5318 *PIC* -- Bruce Forrest -- Tuesday, 18 March 2008, at 1:37 p.m.
4 messages -- Newest posted Wednesday, 19 March 2008, at 12:07 p.m.
Micro-Mesh Sanding Pads -- elliott -- Tuesday, 18 March 2008, at 2:44 p.m.
8 messages -- Newest posted Wednesday, 19 March 2008, at 7:28 a.m.
Kitchener-Waterloo Woodshow, 2008 -- Jim Shaver Oakville, Ontario -- Tuesday, 18 March 2008, at 3:58 p.m.
5 messages -- Newest posted Wednesday, 19 March 2008, at 7:41 p.m.
Glue block broke...HELP -- Jim(IN) -- Tuesday, 18 March 2008, at 5:00 p.m.
23 messages -- Newest posted Sunday, 23 March 2008, at 12:27 a.m.
WOW Membership -- Bill Gasper -- Tuesday, 18 March 2008, at 5:01 p.m.
9 messages -- Newest posted Wednesday, 19 March 2008, at 10:54 a.m.
veritas scraper burnisher -- woody vt -- Tuesday, 18 March 2008, at 7:28 p.m.
3 messages -- Newest posted Wednesday, 19 March 2008, at 4:47 a.m.
Bottle Stoppers -- elliott -- Tuesday, 18 March 2008, at 9:07 p.m.
2 messages -- Newest posted Tuesday, 18 March 2008, at 11:06 p.m.
Watco Butcher Block Finish -- Greg Haugen -- Tuesday, 18 March 2008, at 11:18 p.m.
4 messages -- Newest posted Wednesday, 19 March 2008, at 8:36 p.m.
Turned Lamp *PIC* -- R Acuna -- Wednesday, 19 March 2008, at 1:12 a.m.
7 messages -- Newest posted Wednesday, 19 March 2008, at 9:52 p.m.
Supernova Jaw Screws: Two sizes! -- Jerry Hall -- Wednesday, 19 March 2008, at 2:54 a.m.
6 messages -- Newest posted Wednesday, 19 March 2008, at 8:45 p.m.
Glaser Tool Information? -- George Van -- Wednesday, 19 March 2008, at 7:14 a.m.
5 messages -- Newest posted Wednesday, 19 March 2008, at 10:35 a.m.
Power Switch for My Jet Mini -- Jim Shaver Oakville, Ontario -- Wednesday, 19 March 2008, at 8:23 a.m.
5 messages -- Newest posted Thursday, 20 March 2008, at 2:47 a.m.
shop-made HSS hook tool *LINK* *PIC* -- Ken Grunke from SW WI -- Thursday, 20 March 2008, at 4:03 p.m.
8 messages -- Newest posted Thursday, 20 March 2008, at 9:34 p.m.
Somewhat OT - Jamie's class... -- JL -- Thursday, 20 March 2008, at 4:07 p.m.
3 messages -- Newest posted Monday, 24 March 2008, at 4:42 p.m.
Cup center "New to turning" -- Wayne Carson "TX" -- Thursday, 20 March 2008, at 4:37 p.m.
7 messages -- Newest posted Saturday, 22 March 2008, at 10:36 p.m.
Cherry Burl Bowl *PIC* -- Cyril Griesbach -- Thursday, 20 March 2008, at 4:51 p.m.
5 messages -- Newest posted Friday, 21 March 2008, at 9:06 a.m.
Micro mini goblet *PIC* -- john lucas -- Thursday, 20 March 2008, at 5:19 p.m.
17 messages -- Newest posted Wednesday, 2 April 2008, at 9:01 p.m.
Easter Egg: Could be... *PIC* -- david -- Thursday, 20 March 2008, at 11:39 p.m.
7 messages -- Newest posted Friday, 21 March 2008, at 3:34 p.m.
Varnish and Laquer -- elliott -- Friday, 21 March 2008, at 10:02 a.m.
3 messages -- Newest posted Friday, 21 March 2008, at 2:16 p.m.
Looking for a faceplate thread adapter -- Ilya Zavorin -- Friday, 21 March 2008, at 10:28 a.m.
12 messages -- Newest posted Saturday, 22 March 2008, at 1:57 p.m.
Smiling at me (OT) *PIC* -- Roger Smith -- Friday, 21 March 2008, at 10:56 a.m.
3 messages -- Newest posted Friday, 21 March 2008, at 9:47 p.m.
shihodhuaco??? -- Rick Davenport -- Friday, 21 March 2008, at 1:22 p.m.
7 messages -- Newest posted Friday, 21 March 2008, at 8:01 p.m.
Message problem -- Jeff Lyon -- Friday, 21 March 2008, at 1:52 p.m.
3 messages -- Newest posted Friday, 21 March 2008, at 6:37 p.m.
LATHE ALLIGNMENT OR NOT *PIC* -- Bill Hale / The Wood Spinner -- Friday, 21 March 2008, at 3:46 p.m.
3 messages -- Newest posted Saturday, 22 March 2008, at 12:06 p.m.
Plum Burl -- Doug Reynolds in Seattle -- Friday, 21 March 2008, at 7:48 p.m.
1 message
Lathe in How Stella Got Her Groove Back -- Richard Allen -- Friday, 21 March 2008, at 8:45 p.m.
4 messages -- Newest posted Saturday, 22 March 2008, at 8:28 a.m.
'new' lathe came home today *PIC* -- Ned Bulken -- Friday, 21 March 2008, at 9:25 p.m.
10 messages -- Newest posted Saturday, 22 March 2008, at 8:06 p.m.
Moving day *PIC* -- Carole Valentine -- Friday, 21 March 2008, at 10:07 p.m.
50 messages -- Newest posted Monday, 31 March 2008, at 10:16 a.m.
Pass the plate *PIC* -- jim Miles - Charlotte NC -- Saturday, 22 March 2008, at 3:06 a.m.
2 messages -- Newest posted Saturday, 22 March 2008, at 7:30 p.m.
happr easter *PIC* -- robert davis -- Saturday, 22 March 2008, at 1:27 p.m.
5 messages -- Newest posted Sunday, 23 March 2008, at 6:47 a.m.
Where is your lathe? -- Joe Pack -- Saturday, 22 March 2008, at 3:09 p.m.
34 messages -- Newest posted Monday, 24 March 2008, at 11:49 p.m.
waste block? -- Everette Harmon -- Saturday, 22 March 2008, at 3:17 p.m.
6 messages -- Newest posted Monday, 24 March 2008, at 10:50 p.m.
SawMill site -- The MountainMan -- Sunday, 23 March 2008, at 12:31 a.m.
2 messages -- Newest posted Sunday, 23 March 2008, at 7:47 a.m.
Something recent *PIC* -- steve antonucci -- Sunday, 23 March 2008, at 12:38 a.m.
3 messages -- Newest posted Monday, 24 March 2008, at 11:48 a.m.
wood movement -- woody vt -- Sunday, 23 March 2008, at 5:03 a.m.
6 messages -- Newest posted Monday, 24 March 2008, at 7:28 a.m.
It's been a while *PIC* -- eaglesc -- Sunday, 23 March 2008, at 10:04 a.m.
3 messages -- Newest posted Monday, 24 March 2008, at 2:20 p.m.
What happened while I was gone? -- Jamie Donaldson -- Sunday, 23 March 2008, at 2:09 p.m.
6 messages -- Newest posted Monday, 24 March 2008, at 8:00 a.m.
finials *PIC* -- john lucas -- Monday, 24 March 2008, at 7:27 a.m.
17 messages -- Newest posted Tuesday, 25 March 2008, at 9:37 a.m.
Question for the Pen Turners -- Mike Rubes, Apex, NC -- Monday, 24 March 2008, at 9:05 a.m.
7 messages -- Newest posted Wednesday, 26 March 2008, at 10:43 a.m.
Spalted Wood for Food Contact -- Ed in Sptbg. -- Monday, 24 March 2008, at 10:06 a.m.
4 messages -- Newest posted Monday, 24 March 2008, at 10:11 p.m.
red box *PIC* -- john lucas -- Monday, 24 March 2008, at 11:44 a.m.
9 messages -- Newest posted Tuesday, 25 March 2008, at 10:41 a.m.
My First Teaching Session... -- Dave Winters -- Monday, 24 March 2008, at 12:10 p.m.
8 messages -- Newest posted Monday, 31 March 2008, at 5:58 p.m.
computer question -- Bill Crommett -- Monday, 24 March 2008, at 12:59 p.m.
6 messages -- Newest posted Monday, 24 March 2008, at 5:44 p.m.
New Woodturner!!!!!! -- JK -- Monday, 24 March 2008, at 11:00 p.m.
8 messages -- Newest posted Tuesday, 25 March 2008, at 1:24 p.m.
Hey Carole, Nice Save! -- David Propst -- Monday, 24 March 2008, at 11:01 p.m.
2 messages -- Newest posted Tuesday, 25 March 2008, at 12:39 a.m.
288-192-48 *PIC* -- eaglesc -- Tuesday, 25 March 2008, at 5:40 a.m.
3 messages -- Newest posted Tuesday, 25 March 2008, at 7:36 p.m.
#6 *PIC* -- Carol - now in NC Nebraska -- Tuesday, 25 March 2008, at 8:37 a.m.
10 messages -- Newest posted Wednesday, 26 March 2008, at 6:47 p.m.
It is Bird House Time (Almost) *PIC* -- Mike Brazeau -- Tuesday, 25 March 2008, at 9:09 a.m.
5 messages -- Newest posted Tuesday, 25 March 2008, at 2:13 p.m.
Light glare *PIC* -- Bill Crommett -- Tuesday, 25 March 2008, at 10:44 a.m.
12 messages -- Newest posted Wednesday, 26 March 2008, at 1:05 p.m.
not one for the gallery *PIC* -- John K Jordan -- Tuesday, 25 March 2008, at 11:45 a.m.
18 messages -- Newest posted Thursday, 27 March 2008, at 8:13 a.m.
Turning eucalyptus -- ILYA ZAVORIN -- Tuesday, 25 March 2008, at 11:46 a.m.
6 messages -- Newest posted Wednesday, 26 March 2008, at 1:00 p.m.
Vacuum Chuck..... -- Wally Dickerman in Arizona -- Tuesday, 25 March 2008, at 12:45 p.m.
21 messages -- Newest posted Thursday, 27 March 2008, at 7:20 p.m.
shop progress -- Clay Foster -- Tuesday, 25 March 2008, at 3:53 p.m.
5 messages -- Newest posted Wednesday, 26 March 2008, at 6:25 p.m.
Vic Wood/Tim Skilton sanders? -- wilbur -- Tuesday, 25 March 2008, at 6:07 p.m.
5 messages -- Newest posted Thursday, 27 March 2008, at 6:29 p.m.
Turning A Familiar - Challenging -- charlie belden -- Wednesday, 26 March 2008, at 11:04 a.m.
22 messages -- Newest posted Thursday, 27 March 2008, at 2:52 p.m.
home built lathe -- Darylee -- Wednesday, 26 March 2008, at 1:09 p.m.
19 messages -- Newest posted Monday, 31 March 2008, at 8:36 a.m.
Moisture Meter -- elliott -- Wednesday, 26 March 2008, at 4:41 p.m.
2 messages -- Newest posted Wednesday, 26 March 2008, at 5:05 p.m.
OT_Tree Trimmers/Free wood! -- Ron McKinley -- Wednesday, 26 March 2008, at 9:21 p.m.
3 messages -- Newest posted Thursday, 27 March 2008, at 9:33 a.m.
Make JPEG pictures smaller -- Mitch Cholewinski -- Wednesday, 26 March 2008, at 11:00 p.m.
10 messages -- Newest posted Tuesday, 1 April 2008, at 10:47 a.m.
good sharpening video *NM* *LINK* -- john lucas -- Wednesday, 26 March 2008, at 11:03 p.m.
7 messages -- Newest posted Friday, 28 March 2008, at 8:52 a.m.
finding spalted wood -- Gary Land -- Thursday, 27 March 2008, at 2:37 p.m.
9 messages -- Newest posted Friday, 28 March 2008, at 4:30 p.m.
Weighted Tool Handles.... -- Wally Dickerman in Arizona -- Thursday, 27 March 2008, at 3:07 p.m.
20 messages -- Newest posted Monday, 31 March 2008, at 11:21 a.m.
baseball bat help -- gary s clarke -- Thursday, 27 March 2008, at 6:51 p.m.
5 messages -- Newest posted Friday, 28 March 2008, at 6:45 p.m.
Lacquer over oil? -- Dick Hines -- Thursday, 27 March 2008, at 8:11 p.m.
8 messages -- Newest posted Saturday, 29 March 2008, at 8:35 a.m.
Need help. And I may beed more. -- henthorn -- Thursday, 27 March 2008, at 9:08 p.m.
5 messages -- Newest posted Friday, 28 March 2008, at 3:46 p.m.
Phil Brennion Benefit Sale *PIC* -- david -- Thursday, 27 March 2008, at 10:04 p.m.
9 messages -- Newest posted Friday, 28 March 2008, at 5:10 p.m.
?? about Gingko -- Terry Quiram -- Friday, 28 March 2008, at 8:32 a.m.
8 messages -- Newest posted Saturday, 29 March 2008, at 9:13 p.m.
DeWalt lathe spindle size? -- Bill Grumbine (Kutztown PA) -- Friday, 28 March 2008, at 12:04 p.m.
9 messages -- Newest posted Monday, 31 March 2008, at 9:12 a.m.
Platter Practice #4 *PIC* -- Chris DiCiaccio -- Friday, 28 March 2008, at 1:46 p.m.
5 messages -- Newest posted Saturday, 29 March 2008, at 8:47 a.m.
Happy feet discovery *LINK* *PIC* -- Carol - now in NC Nebraska -- Friday, 28 March 2008, at 3:14 p.m.
24 messages -- Newest posted Sunday, 30 March 2008, at 9:45 a.m.
Box Elder burl box *PIC* -- Curt Fuller -- Saturday, 29 March 2008, at 12:05 a.m.
14 messages -- Newest posted Sunday, 30 March 2008, at 11:36 a.m.
question about polymer clay -- bowlman -- Saturday, 29 March 2008, at 7:15 a.m.
13 messages -- Newest posted Tuesday, 1 April 2008, at 3:28 p.m.
Woodturning Magazines -- Roy Girolami -- Saturday, 29 March 2008, at 10:23 a.m.
2 messages -- Newest posted Monday, 31 March 2008, at 1:10 p.m.
Demo help much appreciated -- Peter Charles Fagg (UK) -- Saturday, 29 March 2008, at 1:33 p.m.
1 message
OT: New Management at NotsoDull! *PIC* -- Rick Davenport -- Saturday, 29 March 2008, at 10:25 p.m.
6 messages -- Newest posted Monday, 31 March 2008, at 10:27 a.m.
Finish after leather dye -- keith zimmerman, Normal IL -- Sunday, 30 March 2008, at 12:51 a.m.
6 messages -- Newest posted Sunday, 30 March 2008, at 11:26 p.m.
skewchigouge? -- Scott Hurley in N. VA -- Sunday, 30 March 2008, at 7:51 a.m.
14 messages -- Newest posted Monday, 31 March 2008, at 6:27 p.m.
AWGB Loughborough 2007 *LINK* -- Peter Hyde -- Sunday, 30 March 2008, at 10:52 a.m.
5 messages -- Newest posted Sunday, 30 March 2008, at 4:50 p.m.
Bowl gouge suggestions -- Ray Carson - Lawrenceville, NJ -- Monday, 31 March 2008, at 12:20 p.m.
31 messages -- Newest posted Wednesday, 2 April 2008, at 1:06 p.m.
Monkey Pod Turned *PIC* -- Ed Larson -- Monday, 31 March 2008, at 7:00 p.m.
2 messages -- Newest posted Monday, 31 March 2008, at 9:48 p.m.
steady rest -- Mark Paulley -- Monday, 31 March 2008, at 7:38 p.m.
7 messages -- Newest posted Tuesday, 1 April 2008, at 10:55 p.m.
Turning Ebonite -- Jim Shaver Oakville, Ontario -- Monday, 31 March 2008, at 8:01 p.m.
6 messages -- Newest posted Wednesday, 2 April 2008, at 11:19 a.m.
Trimming Bowl Blanks -- Steve in NC -- Monday, 31 March 2008, at 10:07 p.m.
16 messages -- Newest posted Wednesday, 2 April 2008, at 10:20 a.m.
Charity Auctions -- Steve in NC -- Monday, 31 March 2008, at 10:23 p.m.
7 messages -- Newest posted Wednesday, 2 April 2008, at 12:08 a.m.
Re:Charity Auction -- Larry -- Monday, 31 March 2008, at 11:17 p.m.
1 message
balanceing system -- olejon10 -- Monday, 31 March 2008, at 11:58 p.m.
3 messages -- Newest posted Tuesday, 1 April 2008, at 1:57 p.m.
Turning - The Adrenaline Factor -- charlie belden -- Tuesday, 1 April 2008, at 12:24 a.m.
16 messages -- Newest posted Wednesday, 2 April 2008, at 4:17 p.m.
Spiral Work *PIC* -- John Morovich -- Tuesday, 1 April 2008, at 1:42 a.m.
6 messages -- Newest posted Wednesday, 2 April 2008, at 4:57 p.m.
Curved Tool Rest -- Jeff Morneault in Northern Maine -- Tuesday, 1 April 2008, at 9:53 a.m.
12 messages -- Newest posted Wednesday, 2 April 2008, at 10:58 a.m.
Phrugal Photo Diagnosis -- Dave Winters -- Tuesday, 1 April 2008, at 12:06 p.m.
14 messages -- Newest posted Sunday, 6 April 2008, at 1:11 p.m.
OT - The Internet and April 1st -- Craig Daymon -- Tuesday, 1 April 2008, at 2:03 p.m.
5 messages -- Newest posted Wednesday, 2 April 2008, at 1:16 p.m.
Allen Neighbours -- Norm Smith -- Tuesday, 1 April 2008, at 2:13 p.m.
3 messages -- Newest posted Wednesday, 2 April 2008, at 7:38 a.m.
turning for a living -- matt -- Tuesday, 1 April 2008, at 3:39 p.m.
46 messages -- Newest posted Friday, 4 April 2008, at 1:46 p.m.
Grinding wheels -- Bruce in Saint John, N.B. -- Tuesday, 1 April 2008, at 6:04 p.m.
12 messages -- Newest posted Saturday, 5 April 2008, at 1:43 p.m.
Invisible Messages - Getting Old -- Clem Wixted -- Wednesday, 2 April 2008, at 8:28 a.m.
12 messages -- Newest posted Saturday, 5 April 2008, at 9:41 p.m.
Chat room -- Dick Hines -- Wednesday, 2 April 2008, at 9:08 p.m.
5 messages -- Newest posted Thursday, 3 April 2008, at 8:58 p.m.
OT DirectTV versus Comcast direct cable -- Dick Coers -- Wednesday, 2 April 2008, at 11:21 p.m.
19 messages -- Newest posted Tuesday, 8 April 2008, at 8:00 a.m.
Powermatic 4224 wiring -- HeatherA -- Thursday, 3 April 2008, at 12:20 a.m.
7 messages -- Newest posted Thursday, 3 April 2008, at 7:41 p.m.
Pen Making Jigs -- elliott -- Thursday, 3 April 2008, at 8:32 a.m.
6 messages -- Newest posted Thursday, 3 April 2008, at 1:56 p.m.
A question for the professional turners? -- steve antonucci -- Thursday, 3 April 2008, at 8:42 a.m.
29 messages -- Newest posted Sunday, 6 April 2008, at 12:36 p.m.
Vise??? -- Jeff Lyon -- Thursday, 3 April 2008, at 10:31 a.m.
5 messages -- Newest posted Sunday, 6 April 2008, at 6:30 a.m.
Self Employed Woodworker - OT -- Mike Stafford -- Thursday, 3 April 2008, at 12:56 p.m.
8 messages -- Newest posted Friday, 4 April 2008, at 9:09 a.m.
Peebomson Tools *PIC* -- David Propst -- Thursday, 3 April 2008, at 4:04 p.m.
19 messages -- Newest posted Tuesday, 8 April 2008, at 5:27 a.m.
Lathe is doing something abnormal! Help? -- Mark Williamson -- Thursday, 3 April 2008, at 9:09 p.m.
5 messages -- Newest posted Wednesday, 9 April 2008, at 9:02 a.m.
Wolverine Jig Notes -- Jennifer@Indy.USA -- Thursday, 3 April 2008, at 10:26 p.m.
6 messages -- Newest posted Friday, 4 April 2008, at 1:20 a.m.
Double your box turning pleasure!!! -- Mike Stafford -- Friday, 4 April 2008, at 9:33 a.m.
4 messages -- Newest posted Friday, 4 April 2008, at 10:17 a.m.
Steady Rest - Pics -- Mike Rubes, Apex, NC -- Friday, 4 April 2008, at 1:42 p.m.
15 messages -- Newest posted Sunday, 6 April 2008, at 5:09 p.m.
Home built lathe -- Darylee -- Friday, 4 April 2008, at 2:05 p.m.
1 message
How strong is superglue? -- Aage Rendalen -- Friday, 4 April 2008, at 2:38 p.m.
4 messages -- Newest posted Friday, 4 April 2008, at 7:14 p.m.
Does larger chuck mean less vibration? -- Aage Rendalen -- Friday, 4 April 2008, at 9:55 p.m.
5 messages -- Newest posted Sunday, 6 April 2008, at 12:59 a.m.
Carol in NC Nebraska... -- GaryG in MD -- Friday, 4 April 2008, at 10:29 p.m.
9 messages -- Newest posted Saturday, 5 April 2008, at 10:39 p.m.
Liability from a charity auction? -- Mike Rubes, Apex, NC -- Saturday, 5 April 2008, at 8:07 a.m.
10 messages -- Newest posted Monday, 7 April 2008, at 7:52 p.m.
hollow form drying question -- Steven Kubien -- Saturday, 5 April 2008, at 7:41 p.m.
18 messages -- Newest posted Tuesday, 8 April 2008, at 9:58 a.m.
Ball end mill on a stick for boxes? -- Craig Daymon -- Saturday, 5 April 2008, at 8:01 p.m.
6 messages -- Newest posted Monday, 7 April 2008, at 8:20 p.m.
wow -- olejon10 -- Saturday, 5 April 2008, at 9:32 p.m.
2 messages -- Newest posted Sunday, 6 April 2008, at 4:13 p.m.
Pen Drilling Vise & Assembly -- elliott -- Saturday, 5 April 2008, at 9:32 p.m.
5 messages -- Newest posted Sunday, 6 April 2008, at 3:15 p.m.
New Toy... *PIC* -- Ed Davidson (Colorado Springs) -- Saturday, 5 April 2008, at 10:24 p.m.
7 messages -- Newest posted Sunday, 6 April 2008, at 9:20 p.m.
Face shield for demomeisters *LINK* -- Ed Karch -- Sunday, 6 April 2008, at 11:04 a.m.
28 messages -- Newest posted Wednesday, 16 April 2008, at 1:10 a.m.
Lee Tree Woodworks *LINK* -- Ron in Drums PA -- Sunday, 6 April 2008, at 12:40 p.m.
9 messages -- Newest posted Thursday, 10 April 2008, at 8:52 a.m.
Box Elder & Koa bowl *PIC* -- Curt Fuller -- Sunday, 6 April 2008, at 1:18 p.m.
3 messages -- Newest posted Sunday, 6 April 2008, at 9:05 p.m.
Wow -- Jim Pittman -- Sunday, 6 April 2008, at 2:43 p.m.
3 messages -- Newest posted Sunday, 6 April 2008, at 9:42 p.m.
LED W/Pics -- Ron in Drums PA -- Sunday, 6 April 2008, at 6:09 p.m.
8 messages -- Newest posted Monday, 7 April 2008, at 12:46 p.m.
For You Pen Turners -- Ken Oakley-Sunny St. Cloud, Fla -- Sunday, 6 April 2008, at 10:46 p.m.
1 message
small screw chuck -- Dennis Taylor -- Monday, 7 April 2008, at 9:50 p.m.
26 messages -- Newest posted Saturday, 9 August 2008, at 11:37 p.m.
A little round...a little flat *PIC* -- Carole Valentine -- Tuesday, 8 April 2008, at 1:13 a.m.
14 messages -- Newest posted Wednesday, 9 April 2008, at 2:52 p.m.
Human Form Multi-Axis Turning -- bowlman -- Tuesday, 8 April 2008, at 6:25 a.m.
3 messages -- Newest posted Tuesday, 8 April 2008, at 11:39 a.m.
Wedding Goblet *PIC* -- Colin Spencer -- Tuesday, 8 April 2008, at 9:17 a.m.
10 messages -- Newest posted Sunday, 13 April 2008, at 5:44 p.m.
turning tool cabinet *PIC* -- Clay Foster -- Tuesday, 8 April 2008, at 11:37 a.m.
22 messages -- Newest posted Thursday, 10 April 2008, at 10:17 p.m.
Looking for finishing "jig" -- Larry In Lima -- Tuesday, 8 April 2008, at 5:19 p.m.
14 messages -- Newest posted Wednesday, 9 April 2008, at 10:59 a.m.
Need a room at Richmond? -- Charlie Anderson -- Tuesday, 8 April 2008, at 8:32 p.m.
3 messages -- Newest posted Wednesday, 9 April 2008, at 4:01 p.m.
Determining moisture content -- Alan Tolchinsky -- Tuesday, 8 April 2008, at 11:21 p.m.
7 messages -- Newest posted Wednesday, 9 April 2008, at 11:00 a.m.
Winged Vessel turning *PIC* -- Randy G -- Wednesday, 9 April 2008, at 1:02 a.m.
13 messages -- Newest posted Thursday, 10 April 2008, at 12:26 p.m.
No Turning ... -- Tim Grenville-Cleave -- Wednesday, 9 April 2008, at 6:12 a.m.
16 messages -- Newest posted Wednesday, 9 April 2008, at 7:27 p.m.
Bandsaw Choice -- Tommy Holmes -- Wednesday, 9 April 2008, at 4:54 p.m.
20 messages -- Newest posted Monday, 14 April 2008, at 10:47 p.m.
Beginner turning problem -- Mark Trulock -- Wednesday, 9 April 2008, at 5:38 p.m.
6 messages -- Newest posted Thursday, 10 April 2008, at 7:02 a.m.
Microwave drying any good? -- Alan Tolchinsky -- Wednesday, 9 April 2008, at 6:32 p.m.
17 messages -- Newest posted Friday, 11 April 2008, at 6:40 p.m.
WTB Tool Cabinet/Chest -- bowlman -- Wednesday, 9 April 2008, at 6:41 p.m.
6 messages -- Newest posted Thursday, 10 April 2008, at 11:43 a.m.
Chestnut -- Lynn Edwards -- Wednesday, 9 April 2008, at 7:32 p.m.
6 messages -- Newest posted Friday, 11 April 2008, at 10:16 p.m.
OT: Looking for a source of Paulownia -- tm -- Thursday, 10 April 2008, at 6:00 a.m.
5 messages -- Newest posted Thursday, 10 April 2008, at 10:56 p.m.
Basswood score *PIC* -- john lucas -- Thursday, 10 April 2008, at 7:59 a.m.
7 messages -- Newest posted Sunday, 13 April 2008, at 1:33 p.m.
Thinking of taking the plunge-tools? *LINK* -- Tony Sade (Charleston, WV) -- Thursday, 10 April 2008, at 9:04 a.m.
9 messages -- Newest posted Tuesday, 15 April 2008, at 2:56 p.m.
Terrific chat with Jacques Vesery -- Mike Stafford -- Thursday, 10 April 2008, at 9:30 a.m.
18 messages -- Newest posted Tuesday, 15 April 2008, at 7:59 a.m.
Predicting crotch figure? -- Ken Platt (Granby, CT) -- Thursday, 10 April 2008, at 11:24 a.m.
4 messages -- Newest posted Thursday, 10 April 2008, at 5:28 p.m.
Chechen domed lid box.... *PIC* -- Mike Stafford -- Thursday, 10 April 2008, at 9:49 p.m.
18 messages -- Newest posted Sunday, 13 April 2008, at 6:42 a.m.
Magnolia wood? -- Mark Paulley -- Friday, 11 April 2008, at 9:10 a.m.
9 messages -- Newest posted Tuesday, 15 April 2008, at 8:38 p.m.
Bethlehem Olivewood Supply Company -- bob henry -- Friday, 11 April 2008, at 12:28 p.m.
4 messages -- Newest posted Sunday, 13 April 2008, at 12:50 a.m.
A New Grandpa *PIC* -- Bill Grumbine (Kutztown PA) -- Friday, 11 April 2008, at 3:15 p.m.
43 messages -- Newest posted Thursday, 17 April 2008, at 10:09 a.m.
Looking for Nick Cook Video Clip... -- jwoodwright -- Friday, 11 April 2008, at 10:57 p.m.
5 messages -- Newest posted Saturday, 12 April 2008, at 5:47 p.m.
Orca Lathe *PIC* -- Jim Shewan -- Saturday, 12 April 2008, at 1:23 a.m.
6 messages -- Newest posted Saturday, 12 April 2008, at 9:40 p.m.
Glue Question -- Sean Troy -- Saturday, 12 April 2008, at 11:41 a.m.
11 messages -- Newest posted Sunday, 13 April 2008, at 11:09 p.m.
Woodworking channel is gone? -- keith zimmerman, Normal IL -- Saturday, 12 April 2008, at 1:18 p.m.
7 messages -- Newest posted Saturday, 12 April 2008, at 7:33 p.m.
Grinding of Spindle Gouges??? -- Jesper, Denmark -- Sunday, 13 April 2008, at 5:43 a.m.
12 messages -- Newest posted Sunday, 13 April 2008, at 4:13 p.m.
To scrape or not to scrape? -- Steve ponch -- Sunday, 13 April 2008, at 9:42 a.m.
22 messages -- Newest posted Sunday, 13 April 2008, at 10:23 p.m.
