Re: four slide rules here... *LINK* -- Carol - now in NC Nebraska -- Wednesday, 16 April 2008, at 12:44 a.m.
2 messages -- Newest posted Wednesday, 16 April 2008, at 11:50 a.m.
very handy shop aid -- Dave Peebles Lyons, Ohio! -- Wednesday, 16 April 2008, at 12:55 a.m.
1 message
Re: Load bearing wall ? -- Keith Newton, LR, Arkansas------WebKitFormBoundary -- Wednesday, 16 April 2008, at 4:53 a.m.
1 message
Re: Sawstop Setup -- Patrick Schupbach -- Wednesday, 16 April 2008, at 10:11 a.m.
3 messages -- Newest posted Wednesday, 16 April 2008, at 9:57 p.m.
Lumber storage question -- Barry Irby -- Wednesday, 16 April 2008, at 10:27 a.m.
15 messages -- Newest posted Saturday, 19 April 2008, at 8:21 p.m.
Re: OT: Slide Rules vs. HP25 -- Gary Camp, Bend, Oregon -- Wednesday, 16 April 2008, at 10:38 a.m.
2 messages -- Newest posted Wednesday, 16 April 2008, at 11:45 a.m.
Table top attachment questions of ye: -- Pete in Holland, MI -- Wednesday, 16 April 2008, at 11:22 a.m.
11 messages -- Newest posted Thursday, 17 April 2008, at 8:25 a.m.
Ray!! -- Rich Glisson (Durham, NC) -- Wednesday, 16 April 2008, at 2:26 p.m.
2 messages -- Newest posted Wednesday, 16 April 2008, at 4:55 p.m.
Myrtle Wood source in Oregon -- Matt Williams -- Wednesday, 16 April 2008, at 3:52 p.m.
2 messages -- Newest posted Friday, 18 April 2008, at 4:08 p.m.
recent work *PIC* -- Robin Corell in Atascadero, CA -- Wednesday, 16 April 2008, at 7:43 p.m.
14 messages -- Newest posted Friday, 18 April 2008, at 12:18 p.m.
OT--Fridge is dead.... -- Martin from Granbury -- Wednesday, 16 April 2008, at 8:28 p.m.
17 messages -- Newest posted Friday, 18 April 2008, at 10:12 a.m.
Rust on driveway OT -- Dustmaker Mike -- Wednesday, 16 April 2008, at 8:52 p.m.
11 messages -- Newest posted Friday, 18 April 2008, at 4:52 p.m.
Re: Need a small piece of walnut -- Barry Irby -- Thursday, 17 April 2008, at 7:54 a.m.
3 messages -- Newest posted Sunday, 20 April 2008, at 8:22 a.m.
Circuit/breaker size for new compressor? -- Tony Sade (Charleston, WV) -- Thursday, 17 April 2008, at 9:19 a.m.
3 messages -- Newest posted Friday, 18 April 2008, at 11:41 p.m.
Good Complements for Red Oak -- Justin Fields -- Thursday, 17 April 2008, at 11:24 a.m.
8 messages -- Newest posted Monday, 21 April 2008, at 8:14 a.m.
The case against hot hide glue - Part I -- GolfSteve in Calgary -- Thursday, 17 April 2008, at 12:36 p.m.
13 messages -- Newest posted Friday, 18 April 2008, at 10:17 p.m.
A story of a stool (pics) -- GolfSteve in Calgary -- Thursday, 17 April 2008, at 4:04 p.m.
30 messages -- Newest posted Sunday, 20 April 2008, at 1:28 p.m.
Looking for a 3" Carbide SawBlade -- WarrenC -- Thursday, 17 April 2008, at 6:41 p.m.
12 messages -- Newest posted Saturday, 19 April 2008, at 6:55 p.m.
OT - Compact Fluorescents Revisited *LINK* -- Bill Hammond, Oregon Coast -- Thursday, 17 April 2008, at 7:09 p.m.
18 messages -- Newest posted Monday, 21 April 2008, at 4:00 p.m.
OT Ringing in my Ears Questions -- Barry Irby -- Thursday, 17 April 2008, at 9:41 p.m.
25 messages -- Newest posted Sunday, 20 April 2008, at 8:01 a.m.
Attention Walmart Shoppers -- Mark Mandell - Gone Round In Jersey -- Friday, 18 April 2008, at 10:08 a.m.
21 messages -- Newest posted Saturday, 19 April 2008, at 10:22 p.m.
Red Oak for Workbench? -- Brint in Richmond, VA -- Friday, 18 April 2008, at 3:23 p.m.
9 messages -- Newest posted Saturday, 19 April 2008, at 11:10 a.m.
Wireless control (3) just arrived *PIC* -- North of the Border -- Friday, 18 April 2008, at 3:42 p.m.
11 messages -- Newest posted Saturday, 19 April 2008, at 11:56 a.m.
OT Mazda Pickup AC Question -- Barry Irby -- Friday, 18 April 2008, at 7:21 p.m.
3 messages -- Newest posted Sunday, 20 April 2008, at 3:57 p.m.
Baseboard Wood Filler? -- Bob Slocum -- Friday, 18 April 2008, at 10:24 p.m.
9 messages -- Newest posted Sunday, 20 April 2008, at 8:56 p.m.
Powermatic Vacuum Chuck Question -- Ron Siebers -- Saturday, 19 April 2008, at 7:56 a.m.
2 messages -- Newest posted Saturday, 19 April 2008, at 11:37 a.m.
Air compressor lines material? -- Pat Matranga -- Saturday, 19 April 2008, at 10:54 a.m.
4 messages -- Newest posted Saturday, 19 April 2008, at 11:56 a.m.
On today's todo list: -- Clint Searl, at the base of Haycock Mtn -- Saturday, 19 April 2008, at 12:09 p.m.
1 message
All good things come to pass... -- Dale Lenz -- Saturday, 19 April 2008, at 12:31 p.m.
6 messages -- Newest posted Monday, 21 April 2008, at 12:55 p.m.
OT: Nitrogen Filled Tires?? -- Ray Newman -- Saturday, 19 April 2008, at 2:14 p.m.
35 messages -- Newest posted Sunday, 20 April 2008, at 5:28 p.m.
Need some help adjusting a Unisaw -- Phil Joines Krum, Tx -- Saturday, 19 April 2008, at 4:52 p.m.
4 messages -- Newest posted Sunday, 20 April 2008, at 1:57 a.m.
Drill Press Mobility -- Tom Rex -- Saturday, 19 April 2008, at 6:57 p.m.
12 messages -- Newest posted Monday, 21 April 2008, at 11:40 a.m.
Olive Wood Question -- Ron In Sterling CT -- Saturday, 19 April 2008, at 8:12 p.m.
9 messages -- Newest posted Monday, 21 April 2008, at 9:22 a.m.
pointy plug question -- Bill Tindall, E.TN -- Saturday, 19 April 2008, at 11:48 p.m.
5 messages -- Newest posted Sunday, 20 April 2008, at 9:46 a.m.
got lost -- James Clair -- Sunday, 20 April 2008, at 5:52 a.m.
1 message
breadboard edge -- David -- Sunday, 20 April 2008, at 8:10 a.m.
2 messages -- Newest posted Sunday, 20 April 2008, at 8:33 a.m.
Help with warped panel -- JohninRI -- Sunday, 20 April 2008, at 8:52 a.m.
4 messages -- Newest posted Monday, 21 April 2008, at 10:38 a.m.
how to control appetite of duct collector -- Bill Tindall, E.TN -- Sunday, 20 April 2008, at 9:07 a.m.
14 messages -- Newest posted Monday, 21 April 2008, at 2:15 p.m.
gluing damp wood -- les winter -- Sunday, 20 April 2008, at 9:43 a.m.
7 messages -- Newest posted Sunday, 20 April 2008, at 9:01 p.m.
Speaking of Nitrogen....... -- Barry Irby -- Sunday, 20 April 2008, at 4:07 p.m.
16 messages -- Newest posted Thursday, 24 April 2008, at 9:30 a.m.
Bookshelves? -- JL -- Sunday, 20 April 2008, at 4:52 p.m.
10 messages -- Newest posted Monday, 21 April 2008, at 12:51 p.m.
What Joint Type and Glue? -- Garrett in Victoria -- Sunday, 20 April 2008, at 5:29 p.m.
5 messages -- Newest posted Monday, 21 April 2008, at 12:02 p.m.
cutting tung and groove oak flooring -- Rodney -- Sunday, 20 April 2008, at 7:52 p.m.
7 messages -- Newest posted Monday, 21 April 2008, at 10:35 a.m.
OT: Dyson . . . too much ? . . . -- steve mackay -- Sunday, 20 April 2008, at 9:04 p.m.
19 messages -- Newest posted Thursday, 24 April 2008, at 2:42 p.m.
WC Weekend Accomplishments..... -- Dennis E. Peacock -- Monday, 21 April 2008, at 9:15 a.m.
22 messages -- Newest posted Saturday, 26 April 2008, at 9:47 a.m.
Wood Markings -- David Ragan -- Monday, 21 April 2008, at 3:33 p.m.
4 messages -- Newest posted Monday, 21 April 2008, at 6:07 p.m.
OT - Charleston SC, where to stay -- Joe in a Cleveland Suburb -- Monday, 21 April 2008, at 5:12 p.m.
13 messages -- Newest posted Thursday, 24 April 2008, at 4:45 p.m.
more on nitrogen and plane tires -- Bill Tindall, E.TN -- Monday, 21 April 2008, at 7:04 p.m.
8 messages -- Newest posted Friday, 25 April 2008, at 1:29 p.m.
With apologies to Harry Nilsson... *NM* -- Mike Hamilton -- Monday, 21 April 2008, at 10:31 p.m.
16 messages -- Newest posted Tuesday, 22 April 2008, at 9:30 a.m.
A way to reduce WW accidents? *LINK* -- Denis Chénard, Orléans, Ont. -- Monday, 21 April 2008, at 11:24 p.m.
4 messages -- Newest posted Tuesday, 22 April 2008, at 12:54 p.m.
More Frank Miller Lumber Tour Stuff *LINK* -- Jennifer@Indy.USA -- Monday, 21 April 2008, at 11:53 p.m.
11 messages -- Newest posted Wednesday, 23 April 2008, at 6:03 a.m.
Sandpaper Supplier -- Frank San Millan -- Tuesday, 22 April 2008, at 3:29 a.m.
2 messages -- Newest posted Tuesday, 22 April 2008, at 5:02 p.m.
woodworking in Albany, NY -- les winter -- Tuesday, 22 April 2008, at 6:09 a.m.
10 messages -- Newest posted Tuesday, 29 April 2008, at 7:56 a.m.
Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 22 April 2008, at 7:25 a.m.
1 message
Book addicts, support WC! *LINK* *PIC* -- John K Jordan -- Tuesday, 22 April 2008, at 7:40 a.m.
3 messages -- Newest posted Wednesday, 23 April 2008, at 7:34 p.m.
How to fix floor squeak -- Bill Tindall, E.TN -- Tuesday, 22 April 2008, at 10:13 a.m.
14 messages -- Newest posted Wednesday, 23 April 2008, at 5:04 p.m.
Made a pair of Adirondack chairs *PIC* -- Eddie Pacheco; San Jose, Ca. -- Tuesday, 22 April 2008, at 3:46 p.m.
13 messages -- Newest posted Wednesday, 23 April 2008, at 12:33 p.m.
Question - Need a metal engineer -- jeff -- Tuesday, 22 April 2008, at 8:13 p.m.
10 messages -- Newest posted Friday, 25 April 2008, at 5:34 p.m.
Who sharpens your jointer knives? -- JohnM in Mid Mich -- Tuesday, 22 April 2008, at 9:21 p.m.
20 messages -- Newest posted Friday, 25 April 2008, at 6:40 a.m.
Dallas, Tx Wood Stores? -- Craig in Silverdale -- Tuesday, 22 April 2008, at 11:31 p.m.
3 messages -- Newest posted Wednesday, 23 April 2008, at 11:01 a.m.
Circle Cutting Jig For the Bandsaw, ?? -- Jim Shaver Oakville, Ont. -- Wednesday, 23 April 2008, at 12:40 p.m.
13 messages -- Newest posted Thursday, 24 April 2008, at 9:37 p.m.
Making Greene and Greene pegs *PIC* -- Thomas S Stockton -- Wednesday, 23 April 2008, at 12:47 p.m.
21 messages -- Newest posted Thursday, 24 April 2008, at 12:37 p.m.
Vacuum Pump -- Tim in SE Michigan -- Wednesday, 23 April 2008, at 2:27 p.m.
7 messages -- Newest posted Thursday, 24 April 2008, at 12:22 p.m.
Plano clamp users? -- Dean Lapinel -- Wednesday, 23 April 2008, at 2:42 p.m.
6 messages -- Newest posted Friday, 25 April 2008, at 1:22 p.m.
Burl Elm -- Jim Hoeller------WebKitFormBoundarycQB+IfmNjFaVxeA -- Wednesday, 23 April 2008, at 9:29 p.m.
6 messages -- Newest posted Thursday, 24 April 2008, at 2:02 p.m.
Mostly OT *LINK* -- Dan Donaldson -- Wednesday, 23 April 2008, at 9:29 p.m.
10 messages -- Newest posted Thursday, 24 April 2008, at 3:43 p.m.
Wallnut slices -- Nistler -- Thursday, 24 April 2008, at 9:56 a.m.
9 messages -- Newest posted Saturday, 26 April 2008, at 11:21 a.m.
Biscuits or dowels? -- JL -- Thursday, 24 April 2008, at 9:57 a.m.
4 messages -- Newest posted Friday, 25 April 2008, at 10:32 a.m.
sawing, drillling magents? -- Bill Tindall, E.TN -- Thursday, 24 April 2008, at 10:01 a.m.
6 messages -- Newest posted Thursday, 24 April 2008, at 9:10 p.m.
So what's with this trim? Or is it me? -- Alan Young -- Thursday, 24 April 2008, at 10:09 a.m.
7 messages -- Newest posted Thursday, 24 April 2008, at 6:28 p.m.
Congrats Dominic Greco ! -- Don Orr -- Friday, 25 April 2008, at 9:39 a.m.
8 messages -- Newest posted Sunday, 27 April 2008, at 3:55 p.m.
WeberWoodworking *LINK* -- Sam McGarrity, Cape Coral, fl -- Friday, 25 April 2008, at 2:41 p.m.
6 messages -- Newest posted Sunday, 27 April 2008, at 8:27 p.m.
finish for ash -- Bill Tindall, E.TN -- Friday, 25 April 2008, at 4:10 p.m.
9 messages -- Newest posted Sunday, 27 April 2008, at 6:39 p.m.
Removing cosmoline..what's the best way? -- Alan Young -- Friday, 25 April 2008, at 4:26 p.m.
9 messages -- Newest posted Saturday, 26 April 2008, at 10:28 a.m.
OT Question on Synthetic Motor oil -- Barry Irby -- Saturday, 26 April 2008, at 9:33 a.m.
16 messages -- Newest posted Thursday, 1 May 2008, at 12:48 p.m.
OT Question on Screen saver/sleep mode -- Barry Irby -- Saturday, 26 April 2008, at 10:07 a.m.
3 messages -- Newest posted Saturday, 26 April 2008, at 12:57 p.m.
Saw Blade Stabilizer -- George@Colonel's Workshop-Havertown PA -- Saturday, 26 April 2008, at 12:14 p.m.
13 messages -- Newest posted Sunday, 27 April 2008, at 1:34 p.m.
Sorta OT what type string -- Dustmaker Mike -- Saturday, 26 April 2008, at 6:08 p.m.
17 messages -- Newest posted Monday, 28 April 2008, at 7:32 a.m.
Excitement on the WC ranch -- Ellis Walentine -- Saturday, 26 April 2008, at 6:42 p.m.
20 messages -- Newest posted Sunday, 27 April 2008, at 8:16 p.m.
Bandsaw Circle Cutter, Success -- Jim Shaver Oakville, Ont. -- Saturday, 26 April 2008, at 6:51 p.m.
5 messages -- Newest posted Monday, 28 April 2008, at 10:59 a.m.
finishing breadboard ends -- hamish -- Saturday, 26 April 2008, at 11:06 p.m.
6 messages -- Newest posted Sunday, 27 April 2008, at 5:14 p.m.
sliding tablesaw -- roger R -- Saturday, 26 April 2008, at 11:26 p.m.
10 messages -- Newest posted Monday, 28 April 2008, at 5:19 p.m.
Puzzled -- Bob Powers -- Sunday, 27 April 2008, at 9:27 a.m.
6 messages -- Newest posted Wednesday, 30 April 2008, at 6:21 p.m.
Sorta OT: Engineered flooring level? -- Bill Howatt -- Sunday, 27 April 2008, at 11:13 a.m.
2 messages -- Newest posted Sunday, 27 April 2008, at 10:03 p.m.
OT for the home inspectors *LINK* -- Dan Donaldson -- Sunday, 27 April 2008, at 1:22 p.m.
5 messages -- Newest posted Sunday, 27 April 2008, at 8:14 p.m.
bought a Ridgid TS 3660 saw -- Bruce Mack -- Sunday, 27 April 2008, at 2:33 p.m.
2 messages -- Newest posted Sunday, 27 April 2008, at 5:56 p.m.
OT Home Inspector ethics question? long -- Barry Irby -- Sunday, 27 April 2008, at 4:51 p.m.
32 messages -- Newest posted Tuesday, 29 April 2008, at 12:35 a.m.
what is this critter *PIC* -- Bill Tindall, E.TN -- Sunday, 27 April 2008, at 7:09 p.m.
12 messages -- Newest posted Monday, 28 April 2008, at 12:16 p.m.
WC Weekend Accomplishments.... -- Dennis E. Peacock -- Monday, 28 April 2008, at 9:35 a.m.
9 messages -- Newest posted Tuesday, 29 April 2008, at 12:11 p.m.
OT Hughesnet email -- Howard Norman -- Monday, 28 April 2008, at 10:23 a.m.
9 messages -- Newest posted Wednesday, 30 April 2008, at 9:38 a.m.
Working with Teak -- Tony - Memphis -- Monday, 28 April 2008, at 2:11 p.m.
9 messages -- Newest posted Wednesday, 30 April 2008, at 10:24 a.m.
Building a Chuppa - ideas anyone? -- Ray Carson - Lawrenceville, NJ -- Monday, 28 April 2008, at 2:53 p.m.
21 messages -- Newest posted Friday, 2 May 2008, at 8:55 p.m.
Review of reviews -- Workbenches (Long) -- Ken Garlock, Collin County Texas -- Monday, 28 April 2008, at 4:20 p.m.
16 messages -- Newest posted Wednesday, 30 April 2008, at 12:32 p.m.
Dewalt 18 volt XRP batteries -- Terry Alexander -- Monday, 28 April 2008, at 6:15 p.m.
4 messages -- Newest posted Tuesday, 29 April 2008, at 2:54 p.m.
Faux Ivory -- Larry -- Monday, 28 April 2008, at 7:07 p.m.
3 messages -- Newest posted Wednesday, 30 April 2008, at 8:51 a.m.
VA WC'rs check in -- Dustmaker Mike -- Monday, 28 April 2008, at 7:26 p.m.
5 messages -- Newest posted Tuesday, 29 April 2008, at 8:42 p.m.
Routing Plywood -- Gregg -- Tuesday, 29 April 2008, at 5:26 p.m.
10 messages -- Newest posted Wednesday, 30 April 2008, at 9:58 a.m.
OT-Rotator Cuff Update -- Ron Hildreth -- Tuesday, 29 April 2008, at 9:25 p.m.
17 messages -- Newest posted Thursday, 1 May 2008, at 7:33 p.m.
OT Computer start up questions. -- Barry Irby -- Wednesday, 30 April 2008, at 7:26 a.m.
13 messages -- Newest posted Wednesday, 30 April 2008, at 8:02 p.m.
round table apron -- David Ragan -- Wednesday, 30 April 2008, at 8:28 a.m.
5 messages -- Newest posted Thursday, 1 May 2008, at 5:13 p.m.
Super powered pocket hole jig *PIC* -- Larry in NW Ohio -- Wednesday, 30 April 2008, at 8:55 a.m.
2 messages -- Newest posted Wednesday, 30 April 2008, at 2:56 p.m.
Steel Wool Tainting my Finish *PIC* -- Ken Bellock (Houston, TX) -- Wednesday, 30 April 2008, at 9:02 a.m.
10 messages -- Newest posted Wednesday, 4 June 2008, at 1:59 a.m.
OT - what's your favorite pellet gun? -- Tim Greif - West of Chicago -- Wednesday, 30 April 2008, at 10:15 a.m.
43 messages -- Newest posted Thursday, 8 May 2008, at 11:08 a.m.
Local classifieds -- Chuck in ND -- Wednesday, 30 April 2008, at 10:26 a.m.
5 messages -- Newest posted Thursday, 1 May 2008, at 3:48 p.m.
Muster on Trivia board. -- Dustmaker Mike -- Wednesday, 30 April 2008, at 12:27 p.m.
3 messages -- Newest posted Thursday, 1 May 2008, at 1:20 p.m.
I'm a gona do some wood working but -- Dustmaker Mike -- Wednesday, 30 April 2008, at 12:42 p.m.
6 messages -- Newest posted Wednesday, 30 April 2008, at 7:24 p.m.
MT-1 and MT-2 -- Wayne Carson "TX" -- Wednesday, 30 April 2008, at 3:58 p.m.
5 messages -- Newest posted Thursday, 1 May 2008, at 10:15 p.m.
OT Drumroll inbetween -- Dustmaker Mike -- Thursday, 1 May 2008, at 6:58 a.m.
5 messages -- Newest posted Thursday, 1 May 2008, at 1:17 p.m.
Bleaching Blue Stain? -- Bill Grumbine (Kutztown PA) -- Thursday, 1 May 2008, at 8:26 a.m.
7 messages -- Newest posted Friday, 2 May 2008, at 1:04 p.m.
What is this? *PIC* -- Alan Young -- Thursday, 1 May 2008, at 8:48 a.m.
28 messages -- Newest posted Friday, 2 May 2008, at 9:16 a.m.
Inca jointer/planer parts source -- Thomas M Keady -- Thursday, 1 May 2008, at 12:07 p.m.
3 messages -- Newest posted Friday, 2 May 2008, at 12:52 p.m.
Shellacing Suitability and Maintenace -- jacob -- Thursday, 1 May 2008, at 12:57 p.m.
14 messages -- Newest posted Friday, 30 May 2008, at 10:05 a.m.
Home Depote -- Larry in NW Ohio -- Thursday, 1 May 2008, at 1:00 p.m.
18 messages -- Newest posted Saturday, 3 May 2008, at 10:56 a.m.
Finishing Cherry -- Barou -- Thursday, 1 May 2008, at 4:46 p.m.
9 messages -- Newest posted Friday, 2 May 2008, at 12:15 p.m.
Forum Issues -- Kneale Brownson Dreaming of the Snow in N. MI -- Thursday, 1 May 2008, at 6:26 p.m.
7 messages -- Newest posted Friday, 2 May 2008, at 6:38 p.m.
Air Drying Lumber -- Dan Collins -- Thursday, 1 May 2008, at 7:26 p.m.
8 messages -- Newest posted Saturday, 3 May 2008, at 10:55 a.m.
Paper backed or solid wood veneer? -- Terry in Edmonton -- Friday, 2 May 2008, at 12:49 p.m.
2 messages -- Newest posted Friday, 2 May 2008, at 1:28 p.m.
When are CA schools out? -- Bill Tindall, E.TN -- Friday, 2 May 2008, at 12:50 p.m.
3 messages -- Newest posted Friday, 2 May 2008, at 1:55 p.m.
Shop Compressor -- Howard -- Friday, 2 May 2008, at 1:36 p.m.
6 messages -- Newest posted Monday, 5 May 2008, at 9:05 a.m.
Passing of a friend *LINK* -- Lee Schierer - McKean, PA -- Friday, 2 May 2008, at 1:45 p.m.
28 messages -- Newest posted Tuesday, 6 May 2008, at 9:36 p.m.
8" grinder fenders -- Carol - now in NC Nebraska -- Friday, 2 May 2008, at 3:20 p.m.
3 messages -- Newest posted Friday, 2 May 2008, at 7:52 p.m.
Furniture movers near Dallas? -- Jeff -- Friday, 2 May 2008, at 6:04 p.m.
3 messages -- Newest posted Friday, 2 May 2008, at 9:21 p.m.
OT Plumbing question -- Tom Pilsbury (Chicago) -- Friday, 2 May 2008, at 6:52 p.m.
12 messages -- Newest posted Saturday, 3 May 2008, at 8:48 a.m.
Completely OT, Patching a muffler -- Barry Irby -- Friday, 2 May 2008, at 7:37 p.m.
16 messages -- Newest posted Monday, 5 May 2008, at 12:39 p.m.
kreg jig question -- jared -- Saturday, 3 May 2008, at 9:14 a.m.
7 messages -- Newest posted Sunday, 4 May 2008, at 10:37 a.m.
OT - anti virus queation -- Robert R Clough - Thorncraft -- Saturday, 3 May 2008, at 11:39 a.m.
7 messages -- Newest posted Sunday, 4 May 2008, at 10:26 a.m.
Help! Paint over silicon OT Kinda -- James Fox -- Saturday, 3 May 2008, at 8:56 p.m.
5 messages -- Newest posted Sunday, 4 May 2008, at 8:33 p.m.
Removing drill chuck help -- jeff -- Sunday, 4 May 2008, at 8:04 a.m.
10 messages -- Newest posted Tuesday, 6 May 2008, at 8:24 a.m.
Ridgid ROS Problems -- Don Wurscher -- Sunday, 4 May 2008, at 8:58 a.m.
2 messages -- Newest posted Sunday, 4 May 2008, at 11:55 a.m.
Black Birch . . . -- steve mackay -- Sunday, 4 May 2008, at 9:56 a.m.
1 message
How to draw an arc? -- Brint in Richmond, VA -- Sunday, 4 May 2008, at 1:07 p.m.
9 messages -- Newest posted Monday, 5 May 2008, at 12:20 a.m.
Woodworking Interest-Stockholm -- Nick Tuzzolino -- Sunday, 4 May 2008, at 1:20 p.m.
4 messages -- Newest posted Monday, 5 May 2008, at 4:02 p.m.
New shop lighting (Long) -- John in IN -- Sunday, 4 May 2008, at 2:50 p.m.
8 messages -- Newest posted Tuesday, 6 May 2008, at 8:50 p.m.
OT : Knuck Humor . . . -- steve mackay -- Sunday, 4 May 2008, at 4:27 p.m.
17 messages -- Newest posted Tuesday, 6 May 2008, at 3:30 a.m.
dovetail jigs -- Robert J Weaver -- Sunday, 4 May 2008, at 7:34 p.m.
8 messages -- Newest posted Wednesday, 7 May 2008, at 3:50 p.m.
Husqvarna vs Stihl -- Frank Orfanello -- Sunday, 4 May 2008, at 9:53 p.m.
22 messages -- Newest posted Wednesday, 7 May 2008, at 4:50 p.m.
Church Alter Plans -- Tom Rex -- Sunday, 4 May 2008, at 10:16 p.m.
7 messages -- Newest posted Monday, 5 May 2008, at 12:15 p.m.
Router bit -- Paul Waddle -- Sunday, 4 May 2008, at 10:57 p.m.
2 messages -- Newest posted Monday, 5 May 2008, at 9:12 a.m.
Mostly OT Google help *LINK* -- Dan Donaldson -- Sunday, 4 May 2008, at 11:18 p.m.
2 messages -- Newest posted Monday, 5 May 2008, at 4:58 p.m.
The satisfaction of discovering... (long) -- Brint in Richmond, VA -- Monday, 5 May 2008, at 12:59 a.m.
7 messages -- Newest posted Tuesday, 6 May 2008, at 11:39 p.m.
WC Weekend Accomplishments..... -- Dennis E. Peacock -- Monday, 5 May 2008, at 8:52 a.m.
15 messages -- Newest posted Tuesday, 6 May 2008, at 9:49 p.m.
Table Router? -- Mark Mandell - Gone Round In Jersey -- Monday, 5 May 2008, at 8:55 a.m.
9 messages -- Newest posted Monday, 5 May 2008, at 5:23 p.m.
cleaning carbide -- DizD -- Monday, 5 May 2008, at 10:44 a.m.
4 messages -- Newest posted Monday, 5 May 2008, at 11:37 a.m.
beding drill rod -- Joe McGill -- Monday, 5 May 2008, at 12:02 p.m.
4 messages -- Newest posted Tuesday, 6 May 2008, at 12:48 p.m.
Sprialling jig? -- JL -- Monday, 5 May 2008, at 2:24 p.m.
5 messages -- Newest posted Tuesday, 6 May 2008, at 4:58 p.m.
Shop fan standstill . . . -- steve mackay -- Tuesday, 6 May 2008, at 1:35 p.m.
5 messages -- Newest posted Tuesday, 6 May 2008, at 2:06 p.m.
OT - Best long range rifle (varmit?) -- Terry Alexander -- Tuesday, 6 May 2008, at 1:52 p.m.
19 messages -- Newest posted Saturday, 10 May 2008, at 11:01 p.m.
Is this a scam????? -- Thomas Skaggs, Foothills of Mount Level -- Tuesday, 6 May 2008, at 2:39 p.m.
14 messages -- Newest posted Wednesday, 7 May 2008, at 9:20 a.m.
Visited the Sam Maloof home -- North of the Border -- Tuesday, 6 May 2008, at 3:06 p.m.
2 messages -- Newest posted Tuesday, 6 May 2008, at 5:23 p.m.
Re: Zinsser SealCoat -- Ron in Weirton -- Tuesday, 6 May 2008, at 8:28 p.m.
1 message
Re: Zinsser SealCoat -- Ron in Weirton -- Tuesday, 6 May 2008, at 8:30 p.m.
1 message
help with design for upscale desk accesory? -- Ken Platt (Granby, CT) -- Tuesday, 6 May 2008, at 10:42 p.m.
6 messages -- Newest posted Wednesday, 7 May 2008, at 10:44 a.m.
***NEW CONTEST*** *LINK* -- Ellis Walentine -- Wednesday, 7 May 2008, at 9:54 a.m.
8 messages -- Newest posted Wednesday, 7 May 2008, at 4:35 p.m.
Neat furniture -- Clint Searl, at the base of Haycock Mtn -- Wednesday, 7 May 2008, at 10:51 a.m.
3 messages -- Newest posted Wednesday, 7 May 2008, at 3:05 p.m.
Bent 1" bandsaw blade -- Dean Lapinel -- Wednesday, 7 May 2008, at 12:01 p.m.
6 messages -- Newest posted Wednesday, 7 May 2008, at 6:25 p.m.
table base ideas? -- Steve Silca -- Wednesday, 7 May 2008, at 12:59 p.m.
2 messages -- Newest posted Wednesday, 7 May 2008, at 2:59 p.m.
Cedar for furniture? -- Dan Mitchell -- Wednesday, 7 May 2008, at 3:01 p.m.
7 messages -- Newest posted Friday, 9 May 2008, at 10:44 p.m.
Quater sawn -- Sean Troy -- Wednesday, 7 May 2008, at 4:26 p.m.
5 messages -- Newest posted Thursday, 8 May 2008, at 10:40 a.m.
search function -- Moses Yoder -- Wednesday, 7 May 2008, at 7:48 p.m.
6 messages -- Newest posted Thursday, 8 May 2008, at 4:04 p.m.
metal studs and hanging cabinets -- jeremy -- Thursday, 8 May 2008, at 1:20 a.m.
3 messages -- Newest posted Thursday, 8 May 2008, at 8:56 a.m.
OT - Anyone like Craftsman tools *LINK* -- Mark Goodall - ATL - tooljunkie -- Thursday, 8 May 2008, at 8:23 a.m.
31 messages -- Newest posted Sunday, 11 May 2008, at 10:41 a.m.
Help Pricing a Planer *PIC* -- Thomas Skaggs, Foothills of Mount Level -- Thursday, 8 May 2008, at 10:38 a.m.
11 messages -- Newest posted Thursday, 8 May 2008, at 9:20 p.m.
Re: I'm here, and here are some answers -- Sawdust Everywhere! -- Thursday, 8 May 2008, at 11:20 a.m.
2 messages -- Newest posted Thursday, 8 May 2008, at 3:16 p.m.
OT--AVG 8.0 -- Kneale Brownson Dreaming of the Snow in N. MI -- Thursday, 8 May 2008, at 12:30 p.m.
30 messages -- Newest posted Wednesday, 14 May 2008, at 3:25 p.m.
FF or 00 biscuit cutter? -- JL -- Thursday, 8 May 2008, at 2:00 p.m.
4 messages -- Newest posted Friday, 9 May 2008, at 12:45 p.m.
OT: Blues and Great Food *LINK* -- Sean Troy -- Thursday, 8 May 2008, at 4:10 p.m.
2 messages -- Newest posted Thursday, 8 May 2008, at 4:35 p.m.
Happy Birthday Andrew F from Downunder -- Dustmaker Mike -- Thursday, 8 May 2008, at 5:45 p.m.
10 messages -- Newest posted Friday, 9 May 2008, at 12:18 p.m.
OT - Cutting cast iron pipe -- Steve Silca -- Thursday, 8 May 2008, at 7:38 p.m.
9 messages -- Newest posted Friday, 9 May 2008, at 10:11 p.m.
OT -- If it looks like a virus... -- Gary Evans Tallassee, TN -- Thursday, 8 May 2008, at 8:28 p.m.
13 messages -- Newest posted Sunday, 11 May 2008, at 12:26 p.m.
Cookies - NM *NM* -- Robert R Clough - Thorncraft -- Thursday, 8 May 2008, at 8:57 p.m.
2 messages -- Newest posted Friday, 9 May 2008, at 9:39 a.m.
lyctid powderpost beetles -- JimG -- Thursday, 8 May 2008, at 9:41 p.m.
9 messages -- Newest posted Friday, 9 May 2008, at 1:57 p.m.
Losing Internet Question? OT -- Barry Irby -- Friday, 9 May 2008, at 9:15 a.m.
10 messages -- Newest posted Sunday, 11 May 2008, at 3:40 a.m.
Finishing a natural edge slab? -- Henry (Raleigh NC) -- Friday, 9 May 2008, at 11:10 a.m.
10 messages -- Newest posted Sunday, 11 May 2008, at 11:23 p.m.
veneer over hardwood -- mdrechnowicz -- Friday, 9 May 2008, at 11:59 a.m.
5 messages -- Newest posted Sunday, 11 May 2008, at 3:33 p.m.
Pocket Hole Screws in Ipe -- Bart Goldberg -- Friday, 9 May 2008, at 2:45 p.m.
9 messages -- Newest posted Sunday, 11 May 2008, at 2:25 p.m.
Desperately Seeking Susan -- Michael Dresdner -- Friday, 9 May 2008, at 4:29 p.m.
5 messages -- Newest posted Saturday, 10 May 2008, at 7:55 p.m.
Eecoulen chuck -- Woodie49 -- Friday, 9 May 2008, at 8:42 p.m.
3 messages -- Newest posted Friday, 9 May 2008, at 10:24 p.m.
cookies, but . . . -- Robert R. Clough - Thorncraft -- Friday, 9 May 2008, at 8:50 p.m.
3 messages -- Newest posted Saturday, 10 May 2008, at 9:52 a.m.
Happy birthday Ron Hildreth -- Al Stokka - Cambridge, Iowa -- Saturday, 10 May 2008, at 4:57 a.m.
2 messages -- Newest posted Saturday, 10 May 2008, at 10:35 a.m.
OT Craigs List -- Sawman -- Saturday, 10 May 2008, at 8:40 a.m.
4 messages -- Newest posted Saturday, 10 May 2008, at 5:13 p.m.
OT -Camera SD card won't read -- Joe Pack -- Saturday, 10 May 2008, at 9:18 a.m.
10 messages -- Newest posted Sunday, 11 May 2008, at 10:51 p.m.
Powder Post Beetles revisited -- JimG -- Saturday, 10 May 2008, at 12:38 p.m.
4 messages -- Newest posted Sunday, 11 May 2008, at 4:27 p.m.
Ky. Artisan Center -- Doug Ridley -- Saturday, 10 May 2008, at 6:29 p.m.
1 message
Tenth Kid Gradfuated College Today. YIPPEE! -- George@Colonel's Workshop-Havertown PA -- Saturday, 10 May 2008, at 8:21 p.m.
11 messages -- Newest posted Tuesday, 13 May 2008, at 3:53 p.m.
Help finding a precision router I saw... -- Scott in Montana -- Saturday, 10 May 2008, at 9:16 p.m.
5 messages -- Newest posted Sunday, 11 May 2008, at 1:21 a.m.
OT Ah, trilliums *PIC* -- Don in Northern Arizona -- Sunday, 11 May 2008, at 2:28 p.m.
5 messages -- Newest posted Monday, 12 May 2008, at 1:10 p.m.
glue -- Bill Arthur -- Sunday, 11 May 2008, at 2:47 p.m.
7 messages -- Newest posted Sunday, 11 May 2008, at 10:36 p.m.
Sorta OT: replacement windows -- John_in_Az -- Sunday, 11 May 2008, at 3:30 p.m.
3 messages -- Newest posted Monday, 12 May 2008, at 5:24 a.m.
An evening in the shop.... -- Alan Young -- Sunday, 11 May 2008, at 7:16 p.m.
8 messages -- Newest posted Monday, 12 May 2008, at 2:14 p.m.
Massive Cherry Tree *PIC* -- Bill Tindall, E.TN -- Sunday, 11 May 2008, at 9:16 p.m.
9 messages -- Newest posted Wednesday, 14 May 2008, at 8:47 a.m.
6" to 4" adaptor for ducting -- WarrenC -- Sunday, 11 May 2008, at 9:59 p.m.
10 messages -- Newest posted Monday, 12 May 2008, at 6:26 p.m.
Any wood boat experts out there? -- Pete in Holland, MI -- Sunday, 11 May 2008, at 11:06 p.m.
2 messages -- Newest posted Monday, 12 May 2008, at 9:12 a.m.
upholstery -- mike mcnerney -- Monday, 12 May 2008, at 4:09 a.m.
4 messages -- Newest posted Sunday, 1 June 2008, at 2:44 p.m.
OT My MOM -- Dustmaker Mike -- Monday, 12 May 2008, at 7:25 a.m.
4 messages -- Newest posted Monday, 12 May 2008, at 11:46 a.m.
WC Weekend Accomplishments.... -- Dennis E. Peacock -- Monday, 12 May 2008, at 8:20 a.m.
13 messages -- Newest posted Tuesday, 13 May 2008, at 8:58 a.m.
Curio - buy or build? Glass cost. -- Dan Manturi -- Monday, 12 May 2008, at 3:41 p.m.
4 messages -- Newest posted Monday, 12 May 2008, at 11:24 p.m.
Porter Cable planer -- Sawman -- Monday, 12 May 2008, at 5:07 p.m.
1 message
IndyFest '08 -- Ray Thompson - Middletown,IN -- Monday, 12 May 2008, at 10:00 p.m.
6 messages -- Newest posted Tuesday, 13 May 2008, at 2:29 p.m.
6/4 or 8/4 source for exceptional walnut -- Scott in Montana -- Monday, 12 May 2008, at 10:08 p.m.
8 messages -- Newest posted Thursday, 15 May 2008, at 12:27 a.m.
Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 13 May 2008, at 7:25 a.m.
1 message
Latex Paint in a Kitchen ... -- Joe Burke -- Tuesday, 13 May 2008, at 9:31 a.m.
12 messages -- Newest posted Wednesday, 14 May 2008, at 9:21 p.m.
OT - Vaccines? *LINK* -- JL -- Tuesday, 13 May 2008, at 10:19 a.m.
6 messages -- Newest posted Wednesday, 14 May 2008, at 1:01 p.m.
Sharpening -- David Ragan -- Tuesday, 13 May 2008, at 10:21 a.m.
2 messages -- Newest posted Tuesday, 13 May 2008, at 11:42 a.m.
If your monday was to much . . . -- steve mackay -- Tuesday, 13 May 2008, at 11:09 a.m.
3 messages -- Newest posted Tuesday, 13 May 2008, at 12:22 p.m.
Best brush for acyrlic paint -- Sawman -- Tuesday, 13 May 2008, at 2:36 p.m.
5 messages -- Newest posted Tuesday, 13 May 2008, at 8:59 p.m.
Shopnotes renewal -- Pat Evans -- Tuesday, 13 May 2008, at 3:34 p.m.
7 messages -- Newest posted Friday, 16 May 2008, at 11:17 a.m.
OT Question on Bifocal eyeglasses. -- Barry Irby -- Tuesday, 13 May 2008, at 4:58 p.m.
14 messages -- Newest posted Sunday, 18 May 2008, at 12:49 a.m.
PVC OUTSIDE TRIM -- Ron Gricher -- Tuesday, 13 May 2008, at 7:08 p.m.
2 messages -- Newest posted Tuesday, 13 May 2008, at 9:03 p.m.
10" 1994 General TS -- Jon Grider -- Tuesday, 13 May 2008, at 9:18 p.m.
6 messages -- Newest posted Wednesday, 14 May 2008, at 5:29 p.m.
support for box lid -- Wayne Carson -- Tuesday, 13 May 2008, at 10:33 p.m.
8 messages -- Newest posted Thursday, 15 May 2008, at 8:15 a.m.
Walnut allergy questions again. -- Barry Irby -- Wednesday, 14 May 2008, at 9:08 a.m.
9 messages -- Newest posted Thursday, 15 May 2008, at 10:16 a.m.
OT - Smart car not so bad in crashes *LINK* -- Denis Chénard, Orléans, Ont. -- Wednesday, 14 May 2008, at 1:18 p.m.
2 messages -- Newest posted Friday, 16 May 2008, at 1:02 p.m.
"Aircraft" drill bits? -- JL -- Wednesday, 14 May 2008, at 1:43 p.m.
8 messages -- Newest posted Wednesday, 14 May 2008, at 11:41 p.m.
OT: Oak floor refinishing -- Dean Lapinel -- Wednesday, 14 May 2008, at 3:58 p.m.
8 messages -- Newest posted Friday, 16 May 2008, at 1:46 a.m.
Penn State table saw dust guard *LINK* -- Rob Ring -- Wednesday, 14 May 2008, at 6:09 p.m.
3 messages -- Newest posted Thursday, 15 May 2008, at 9:58 a.m.
Needa Laugh? (OT) -- Ray Binnicker -- Wednesday, 14 May 2008, at 6:45 p.m.
3 messages -- Newest posted Thursday, 15 May 2008, at 10:52 a.m.
OT Bike parts -- Sawman -- Wednesday, 14 May 2008, at 6:54 p.m.
9 messages -- Newest posted Thursday, 15 May 2008, at 1:44 p.m.
Trim Routers -- Dick H -- Wednesday, 14 May 2008, at 8:23 p.m.
8 messages -- Newest posted Saturday, 17 May 2008, at 5:31 a.m.
OT - Major appliance repair board -- Glenn Madsen, SF Bay Area -- Wednesday, 14 May 2008, at 9:46 p.m.
12 messages -- Newest posted Monday, 19 May 2008, at 7:08 p.m.
Hardwood Flooring questions -- John T -- Wednesday, 14 May 2008, at 9:54 p.m.
25 messages -- Newest posted Sunday, 18 May 2008, at 2:11 a.m.
Festool Domino -- vance hough -- Wednesday, 14 May 2008, at 10:12 p.m.
8 messages -- Newest posted Friday, 16 May 2008, at 11:30 p.m.
Reliant Heavy Duty Spindle Shaper -- Sue McLam in Orange, VT -- Thursday, 15 May 2008, at 9:46 a.m.
4 messages -- Newest posted Thursday, 15 May 2008, at 4:38 p.m.
project idea *NM* -- John K Jordan -- Thursday, 15 May 2008, at 10:57 a.m.
15 messages -- Newest posted Sunday, 18 May 2008, at 8:14 p.m.
hardwood flooring installation -- Rick in Colgate, Wi -- Thursday, 15 May 2008, at 11:51 a.m.
12 messages -- Newest posted Saturday, 17 May 2008, at 4:36 p.m.
Attn: Train lovers (OT) *LINK* -- Larry in NW Ohio -- Thursday, 15 May 2008, at 5:13 p.m.
4 messages -- Newest posted Thursday, 15 May 2008, at 7:51 p.m.
lf excalibur table saw fence manual -- Eric in Los Gatos -- Thursday, 15 May 2008, at 5:26 p.m.
3 messages -- Newest posted Friday, 16 May 2008, at 8:03 a.m.
finishes for zebrawood -- Ron Detz -- Thursday, 15 May 2008, at 7:58 p.m.
9 messages -- Newest posted Saturday, 17 May 2008, at 6:27 p.m.
OT: “Fume” mask help needed -- Rich Pearson -- Friday, 16 May 2008, at 11:57 p.m.
20 messages -- Newest posted Wednesday, 18 June 2008, at 1:48 a.m.
OT (sorta):Longevity of wood mulch -- Al Stokka - Cambridge, Iowa -- Saturday, 17 May 2008, at 8:47 a.m.
4 messages -- Newest posted Sunday, 18 May 2008, at 7:55 p.m.
Finishing Wine Rack -- Al Goldstein -- Saturday, 17 May 2008, at 5:23 p.m.
7 messages -- Newest posted Thursday, 22 May 2008, at 4:54 p.m.
Grizzly tools good or bad? -- Edward McCormack -- Saturday, 17 May 2008, at 6:06 p.m.
16 messages -- Newest posted Tuesday, 20 May 2008, at 6:02 p.m.
Aniline dye -- Barry Rubenstein -- Sunday, 18 May 2008, at 6:43 a.m.
4 messages -- Newest posted Monday, 19 May 2008, at 2:15 p.m.
OT Bach on a lute *LINK* -- Dan Donaldson -- Sunday, 18 May 2008, at 12:47 p.m.
7 messages -- Newest posted Monday, 19 May 2008, at 4:06 p.m.
Latest Project (w/ pics)--Long -- Joanne Adler in Pt. Pleasant, PA -- Sunday, 18 May 2008, at 3:03 p.m.
30 messages -- Newest posted Monday, 18 August 2008, at 2:11 p.m.
OT: Tax rebate -- Dan Mitchell -- Monday, 19 May 2008, at 12:34 a.m.
16 messages -- Newest posted Tuesday, 20 May 2008, at 2:39 p.m.
WC Weekend Accomplishments.... -- Dennis E. Peacock -- Monday, 19 May 2008, at 8:54 a.m.
17 messages -- Newest posted Friday, 23 May 2008, at 6:17 a.m.
OT - A seriously dumb electrical question -- Joe in a Cleveland Suburb -- Monday, 19 May 2008, at 11:54 a.m.
11 messages -- Newest posted Tuesday, 20 May 2008, at 6:38 p.m.
OT-AND He Teaches Woodworking ;-) -- Lee Gordon -- Monday, 19 May 2008, at 12:26 p.m.
3 messages -- Newest posted Monday, 19 May 2008, at 6:12 p.m.
PC 7529 Router - faulty switch -- Louie Lovas -- Monday, 19 May 2008, at 3:12 p.m.
2 messages -- Newest posted Monday, 19 May 2008, at 3:40 p.m.
Rocking Horse -- Lester Gillett/Independence Mo -- Monday, 19 May 2008, at 6:58 p.m.
2 messages -- Newest posted Monday, 19 May 2008, at 7:11 p.m.
Electrical breaker pops question -- jeff -- Monday, 19 May 2008, at 7:31 p.m.
5 messages -- Newest posted Tuesday, 20 May 2008, at 8:00 a.m.
Can we apply spray polyurethane on -- North of the Border -- Monday, 19 May 2008, at 8:00 p.m.
5 messages -- Newest posted Monday, 19 May 2008, at 10:17 p.m.
OT Online Eyeglasses Cheap (Repeat) -- Barry Irby -- Tuesday, 20 May 2008, at 7:32 a.m.
7 messages -- Newest posted Tuesday, 20 May 2008, at 10:39 a.m.
Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 20 May 2008, at 7:43 a.m.
1 message
***12 New Book Reviews** *LINK* *PIC* -- Ellis Walentine -- Tuesday, 20 May 2008, at 9:12 a.m.
3 messages -- Newest posted Tuesday, 20 May 2008, at 6:41 p.m.
Clay Foster -OT -- Jennifer@Indy.USA -- Tuesday, 20 May 2008, at 9:20 a.m.
1 message
Can't believe the cap . . . -- steve mackay -- Tuesday, 20 May 2008, at 11:16 a.m.
3 messages -- Newest posted Tuesday, 20 May 2008, at 3:57 p.m.
*** SURVEY: THE IDES OF MAY +5 *** -- Ellis Walentine -- Tuesday, 20 May 2008, at 11:20 a.m.
9 messages -- Newest posted Thursday, 22 May 2008, at 10:55 a.m.
Home Depot profit tanked news -- North of the Border -- Tuesday, 20 May 2008, at 11:21 a.m.
21 messages -- Newest posted Monday, 26 May 2008, at 12:59 p.m.
OT(slightly) Door hardware ? -- Andy Lincoln,In Dearborn MI -- Tuesday, 20 May 2008, at 12:59 p.m.
2 messages -- Newest posted Tuesday, 20 May 2008, at 3:09 p.m.
Unanswered Question-Handymans Club -- George@Colonel's Workshop-Havertown PA -- Tuesday, 20 May 2008, at 2:21 p.m.
9 messages -- Newest posted Wednesday, 21 May 2008, at 10:35 a.m.
Wood movement in Qtr. sawn oak -- Randy Stukenberg -- Tuesday, 20 May 2008, at 3:19 p.m.
9 messages -- Newest posted Tuesday, 20 May 2008, at 6:25 p.m.
Flush mount doors aren't flush!!! -- Bill H-Evansville, IN -- Tuesday, 20 May 2008, at 11:43 p.m.
5 messages -- Newest posted Friday, 23 May 2008, at 12:14 a.m.
Old Stanley level - bedding the vial -- Dan Kruitz -- Wednesday, 21 May 2008, at 12:53 a.m.
7 messages -- Newest posted Wednesday, 21 May 2008, at 7:42 p.m.
OT Question for Tree guys -- Barry Irby -- Wednesday, 21 May 2008, at 7:12 a.m.
9 messages -- Newest posted Wednesday, 21 May 2008, at 10:13 p.m.
My New Shop-Electrical Question -- Howard -- Wednesday, 21 May 2008, at 12:37 p.m.
8 messages -- Newest posted Friday, 23 May 2008, at 8:30 a.m.
Great Woodcentral Smokeout -- Gabe Doyle, now in Mesa, AZ -- Wednesday, 21 May 2008, at 1:09 p.m.
24 messages -- Newest posted Thursday, 22 May 2008, at 5:14 p.m.
Powered Respirators - question. long -- Robert R. Clough - Tthorncraft -- Wednesday, 21 May 2008, at 9:21 p.m.
6 messages -- Newest posted Thursday, 22 May 2008, at 5:10 p.m.
Temporary wooden ramps? -- JL -- Wednesday, 21 May 2008, at 9:21 p.m.
10 messages -- Newest posted Thursday, 22 May 2008, at 9:27 p.m.
OT Hollywood Squares -- Dustmaker Mike -- Thursday, 22 May 2008, at 2:23 a.m.
3 messages -- Newest posted Thursday, 22 May 2008, at 12:32 p.m.
OT Wind generated Electricity question? -- Barry Irby -- Thursday, 22 May 2008, at 8:56 a.m.
9 messages -- Newest posted Thursday, 22 May 2008, at 2:53 p.m.
Semi OT: Mystery -- Mark Mandell - Gone Round In Jersey -- Thursday, 22 May 2008, at 11:52 a.m.
10 messages -- Newest posted Thursday, 22 May 2008, at 6:47 p.m.
OT: Plumbing -- Sean Troy -- Thursday, 22 May 2008, at 12:39 p.m.
6 messages -- Newest posted Thursday, 22 May 2008, at 3:37 p.m.
New Lee Valley catalog! *LINK* -- Ellis Walentine -- Thursday, 22 May 2008, at 12:59 p.m.
2 messages -- Newest posted Thursday, 22 May 2008, at 5:35 p.m.
Finally Finished a Project! New Table -- Garrett in Victoria -- Thursday, 22 May 2008, at 1:40 p.m.
8 messages -- Newest posted Thursday, 22 May 2008, at 9:37 p.m.
Drill Doctor Question -- Bill Tindall, E.TN -- Thursday, 22 May 2008, at 2:25 p.m.
5 messages -- Newest posted Thursday, 22 May 2008, at 11:22 p.m.
10" saw blades -- iew -- Thursday, 22 May 2008, at 3:52 p.m.
24 messages -- Newest posted Friday, 30 May 2008, at 6:39 a.m.
Indoor Beehive -- Jim in Conowingo -- Thursday, 22 May 2008, at 4:06 p.m.
8 messages -- Newest posted Friday, 23 May 2008, at 9:45 a.m.
planer snipes -- jack dolan -- Thursday, 22 May 2008, at 4:23 p.m.
3 messages -- Newest posted Thursday, 22 May 2008, at 5:15 p.m.
jointer snipes -- jack dolan -- Thursday, 22 May 2008, at 5:07 p.m.
4 messages -- Newest posted Friday, 23 May 2008, at 5:12 p.m.
Mark Laub -- Michael Dresdner -- Thursday, 22 May 2008, at 5:32 p.m.
4 messages -- Newest posted Thursday, 22 May 2008, at 9:35 p.m.
Wood ID--finally a word from Forest Service -- Joanne Adler in Pt. Pleasant, PA -- Thursday, 22 May 2008, at 8:21 p.m.
6 messages -- Newest posted Saturday, 24 May 2008, at 7:47 a.m.
Somewhat OT...it is partially wood -- Stuart Hough -- Thursday, 22 May 2008, at 9:41 p.m.
4 messages -- Newest posted Friday, 23 May 2008, at 9:38 a.m.
Interesting table *LINK* -- Dan Donaldson -- Friday, 23 May 2008, at 12:12 a.m.
5 messages -- Newest posted Friday, 23 May 2008, at 1:04 p.m.
Spring in Flagstaff *PIC* -- Don in Northern Arizona -- Friday, 23 May 2008, at 9:51 a.m.
12 messages -- Newest posted Saturday, 24 May 2008, at 12:25 p.m.
Ok chainsaw experts, how's the oiler work? -- John in New Mexico -- Saturday, 24 May 2008, at 11:07 a.m.
5 messages -- Newest posted Saturday, 24 May 2008, at 2:20 p.m.
Finding CNC shops near Los Angeles -- Jeff -- Saturday, 24 May 2008, at 1:37 p.m.
2 messages -- Newest posted Saturday, 24 May 2008, at 3:13 p.m.
Prazi Chestmate Dovetail Fixture -- Chicago Bob -- Saturday, 24 May 2008, at 2:05 p.m.
3 messages -- Newest posted Monday, 26 May 2008, at 12:18 p.m.
Danish Oil & Shellac ? -- Barry Rubenstein -- Saturday, 24 May 2008, at 4:42 p.m.
8 messages -- Newest posted Sunday, 25 May 2008, at 9:57 p.m.
Advice needed for Jointer purchase.... -- Steve Woodall -- Saturday, 24 May 2008, at 10:47 p.m.
9 messages -- Newest posted Sunday, 25 May 2008, at 9:26 p.m.
OT - How would you kill me? *PIC* -- Ken Bellock (Houston, TX) -- Saturday, 24 May 2008, at 11:08 p.m.
13 messages -- Newest posted Monday, 26 May 2008, at 2:48 p.m.
Tree watering question -- Phil Joines Krum, Tx -- Sunday, 25 May 2008, at 2:03 a.m.
9 messages -- Newest posted Monday, 26 May 2008, at 9:00 a.m.
Shoe Glue -- Gary Smyth -- Sunday, 25 May 2008, at 7:10 a.m.
10 messages -- Newest posted Monday, 26 May 2008, at 10:29 a.m.
Clock Progress *PIC* -- George@Colonel's Workshop-Havertown PA -- Sunday, 25 May 2008, at 3:38 p.m.
9 messages -- Newest posted Monday, 26 May 2008, at 12:25 p.m.
outside table top finish? -- ken rewerts -- Sunday, 25 May 2008, at 4:29 p.m.
2 messages -- Newest posted Sunday, 25 May 2008, at 8:27 p.m.
No formal chat tonight -- Ellis Walentine -- Sunday, 25 May 2008, at 4:32 p.m.
1 message
OT for guitar players out there *LINK* -- Dan Donaldson -- Sunday, 25 May 2008, at 4:39 p.m.
2 messages -- Newest posted Monday, 26 May 2008, at 9:06 a.m.
OT Repairing my tree questions? -- Barry Irby -- Sunday, 25 May 2008, at 5:35 p.m.
11 messages -- Newest posted Tuesday, 27 May 2008, at 10:10 a.m.
Grit additives for polyurethane? -- JL -- Sunday, 25 May 2008, at 9:09 p.m.
6 messages -- Newest posted Monday, 26 May 2008, at 10:26 a.m.
OT Mature Tree Roots to close to top -- Dustmaker Mike -- Monday, 26 May 2008, at 7:21 a.m.
9 messages -- Newest posted Wednesday, 28 May 2008, at 7:54 a.m.
Saw Stop Contractor's Model *PIC* -- David Yoho -- Monday, 26 May 2008, at 8:58 a.m.
15 messages -- Newest posted Friday, 30 May 2008, at 1:10 a.m.
OT--Old hard drive in a new box? -- Gary Evans Tallassee, TN -- Monday, 26 May 2008, at 9:09 a.m.
3 messages -- Newest posted Monday, 26 May 2008, at 2:11 p.m.
OT Questions for house painters -- Barry Irby -- Monday, 26 May 2008, at 12:39 p.m.
10 messages -- Newest posted Thursday, 29 May 2008, at 12:19 a.m.
Boy, am I confused… -- Rod Peterson -- Ormond Beach -- Monday, 26 May 2008, at 2:11 p.m.
6 messages -- Newest posted Monday, 26 May 2008, at 8:38 p.m.
detail sanders which one is best -- Michigander51 -- Monday, 26 May 2008, at 3:39 p.m.
6 messages -- Newest posted Monday, 26 May 2008, at 10:35 p.m.
Instant gratification *PIC* -- Clint Searl, at the base of Haycock Mtn -- Monday, 26 May 2008, at 8:58 p.m.
6 messages -- Newest posted Wednesday, 28 May 2008, at 11:32 a.m.
Router table plates?? -- Rob Stokes in North Vancouver -- Monday, 26 May 2008, at 9:53 p.m.
9 messages -- Newest posted Wednesday, 28 May 2008, at 7:51 p.m.
"puckered" rail and stile doors *PIC* -- Bill- Evansville, IN -- Monday, 26 May 2008, at 10:42 p.m.
9 messages -- Newest posted Tuesday, 27 May 2008, at 10:32 p.m.
A few patina recipes (long) -- Clint Searl, at the base of Haycock Mtn -- Tuesday, 27 May 2008, at 12:59 a.m.
17 messages -- Newest posted Thursday, 29 May 2008, at 2:35 p.m.
WC Weekend Accomplishments..... -- Dennis E. Peacock -- Tuesday, 27 May 2008, at 7:30 a.m.
9 messages -- Newest posted Wednesday, 28 May 2008, at 7:52 a.m.
OT Any Poison Oak sufferers here? -- Barry Irby -- Tuesday, 27 May 2008, at 8:02 a.m.
4 messages -- Newest posted Thursday, 29 May 2008, at 6:59 a.m.
Totally OT. Scouters will enjoy *LINK* -- Dan Donaldson -- Tuesday, 27 May 2008, at 8:41 a.m.
5 messages -- Newest posted Tuesday, 27 May 2008, at 7:41 p.m.
WAY OT - do dragonflies spin webs? -- Joe in a Cleveland Suburb -- Tuesday, 27 May 2008, at 8:49 a.m.
8 messages -- Newest posted Wednesday, 28 May 2008, at 8:35 a.m.
Wood movement? -- JL -- Tuesday, 27 May 2008, at 10:33 a.m.
7 messages -- Newest posted Tuesday, 27 May 2008, at 3:29 p.m.
Bending and moulding plexi glass -- Mark McC -- Tuesday, 27 May 2008, at 10:52 a.m.
5 messages -- Newest posted Tuesday, 27 May 2008, at 10:01 p.m.
Router in table saw wing? -- Robert Henderson -- Tuesday, 27 May 2008, at 12:08 p.m.
18 messages -- Newest posted Monday, 9 June 2008, at 2:50 p.m.
SWMBO wants this painted black *PIC* -- Pat Evans -- Tuesday, 27 May 2008, at 1:41 p.m.
13 messages -- Newest posted Wednesday, 28 May 2008, at 11:43 a.m.
Grand Old Oak (sigh) . . . *PIC* -- steve mackay -- Tuesday, 27 May 2008, at 7:53 p.m.
9 messages -- Newest posted Friday, 30 May 2008, at 4:29 p.m.
Neat Table *LINK* -- Ron in Drums PA -- Tuesday, 27 May 2008, at 9:09 p.m.
7 messages -- Newest posted Monday, 2 June 2008, at 7:26 a.m.
cookies *NM* -- Robert R Clough - Thorncraft -- Tuesday, 27 May 2008, at 9:11 p.m.
4 messages -- Newest posted Wednesday, 28 May 2008, at 8:41 p.m.
15" PM Planer -- mdclor -- Tuesday, 27 May 2008, at 9:53 p.m.
4 messages -- Newest posted Wednesday, 28 May 2008, at 8:41 p.m.
OT sorta but related to electronics etc. -- Forrest Addy -- Tuesday, 27 May 2008, at 11:21 p.m.
4 messages -- Newest posted Wednesday, 28 May 2008, at 4:55 p.m.
