Post New Message      Search Current Messages      Set Preferences      Top 10      View User Profiles      Create Profile       Message Archives      Messageboard FAQs      SPAM PATROL

Hand Tools

Welcome!
Messages Posted Within the Last 10 Year(s)		(Compressed Listing)

• Lie-Nielsen has *NM* *LINK* -- Jack Guzman from Maine -- Monday, 3 December 2007, at 7:19 a.m.
  1 message
• Re: Drawbore Pin Help! -- Stephen Shepherd in the State of Deseret -- Monday, 3 December 2007, at 7:23 a.m.
  1 message
• Re: Drawbore Pin Help! -- hunter -- Monday, 3 December 2007, at 7:32 a.m.
  1 message
• Re: Stanely #7 - Flatten sole? -- paul womack -- Monday, 3 December 2007, at 7:45 a.m.
  1 message
• Re: Got pic ? Like to see it. -- Ernie Miller -- Monday, 3 December 2007, at 8:31 a.m.
  1 message
• Dowels versus Pins -- Warren in Lancaster, Pa -- Monday, 3 December 2007, at 8:59 a.m.
  6 messages -- Newest posted Tuesday, 4 December 2007, at 12:05 a.m.
• Early type frankenplane *LINK* -- Cooper Suter -- Monday, 3 December 2007, at 9:11 a.m.
  1 message
• BIG New Shop Shot -- David Yoho -- Monday, 3 December 2007, at 9:22 a.m.
  1 message
• Right here. *NM* *LINK* -- Darrin -- Monday, 3 December 2007, at 9:36 a.m.
  3 messages -- Newest posted Tuesday, 4 December 2007, at 12:16 a.m.
• Re: Stephen -- Matt Wilson -- Monday, 3 December 2007, at 9:37 a.m.
  1 message
• The borg (!) to the rescue -- wilbur -- Monday, 3 December 2007, at 9:37 a.m.
  6 messages -- Newest posted Thursday, 6 December 2007, at 6:13 p.m.
• Get-Together at "SawBoy's" in Lake Wales *PIC* -- Mike Fitterling -- Monday, 3 December 2007, at 10:42 a.m.
  8 messages -- Newest posted Friday, 7 December 2007, at 8:25 a.m.
• Re: Using Super Glue as a finish -- John Aniano in NJ... -- Monday, 3 December 2007, at 11:18 a.m.
  2 messages -- Newest posted Monday, 3 December 2007, at 2:12 p.m.
• Re: Easy Test *PIC* -- ThomD -- Monday, 3 December 2007, at 12:00 p.m.
  1 message
• Nibs -- Todd Hughes -- Monday, 3 December 2007, at 12:36 p.m.
  1 message
• Re: Drawbore Pin Help! -- markfromsacramento -- Monday, 3 December 2007, at 3:28 p.m.
  1 message
• How to harvest hand saw nuts *PIC* -- David Miller from Iowa -- Monday, 3 December 2007, at 3:43 p.m.
  5 messages -- Newest posted Monday, 10 December 2007, at 1:10 p.m.
• UPDATE... *PIC* -- Scott in Douglassville, PA -- Monday, 3 December 2007, at 4:13 p.m.
  12 messages -- Newest posted Wednesday, 5 December 2007, at 10:10 a.m.
• Re: Easy Test -- Kerry Cox in Alberta, Canada -- Monday, 3 December 2007, at 5:44 p.m.
  1 message
• Re: Got pic ? Like to see it. -- Moses Yoder in White Pigeon, MI -- Monday, 3 December 2007, at 7:20 p.m.
  1 message
• Re: Stephen Shepherd -- Moses Yoder in White Pigeon, MI -- Monday, 3 December 2007, at 7:28 p.m.
  3 messages -- Newest posted Tuesday, 4 December 2007, at 2:26 p.m.
• Late 19th Century Plated Drill Braces -- David W Dougherty -- Monday, 3 December 2007, at 7:34 p.m.
  7 messages -- Newest posted Tuesday, 4 December 2007, at 11:53 a.m.
• So it's not just me! Thanks. -- Chuck Nickerson -- Monday, 3 December 2007, at 11:03 p.m.
  1 message
• Keeping the conversation going (historical) -- Bill Houghton, Sebastopol, CA -- Monday, 3 December 2007, at 11:08 p.m.
  4 messages -- Newest posted Tuesday, 4 December 2007, at 9:18 p.m.
• Right...and wrong -- Todd Hughes -- Tuesday, 4 December 2007, at 4:49 a.m.
  2 messages -- Newest posted Wednesday, 5 December 2007, at 3:26 p.m.
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 4 December 2007, at 6:37 a.m.
  1 message
• WC Benefit Christmas Auction, Update *LINK* -- Jim Shaver - Oakville, Ontario -- Tuesday, 4 December 2007, at 8:39 a.m.
  1 message
• WOW Scott, Those look great! *NM* -- Scott Burr in Ben Lomond CA -- Tuesday, 4 December 2007, at 11:19 a.m.
  1 message
• So.... -- Scott Burr in Ben Lomond CA -- Tuesday, 4 December 2007, at 11:20 a.m.
  1 message
• Rag fires -- Marv -- Tuesday, 4 December 2007, at 12:44 p.m.
  32 messages -- Newest posted Friday, 7 December 2007, at 12:29 a.m.
• Re: Eye dominance -- Marv -- Tuesday, 4 December 2007, at 4:46 p.m.
  1 message
• Secret Santa, names out, and last chance signup -- Pat Riley -- Tuesday, 4 December 2007, at 7:10 p.m.
  3 messages -- Newest posted Tuesday, 4 December 2007, at 8:03 p.m.
• Re: Fixall, plaster of paris, or cement? -- Glenn Madsen near San Francisco -- Tuesday, 4 December 2007, at 7:14 p.m.
  1 message
• Instant Saw Set Till *PIC* -- Kevin French, Antrim, NH -- Tuesday, 4 December 2007, at 9:02 p.m.
  7 messages -- Newest posted Wednesday, 5 December 2007, at 5:49 p.m.
• What is this for? *LINK* -- David Miller from Iowa -- Tuesday, 4 December 2007, at 9:38 p.m.
  3 messages -- Newest posted Tuesday, 4 December 2007, at 11:04 p.m.
• Re: Yeah, but for some of us... -- James Watriss -- Tuesday, 4 December 2007, at 11:16 p.m.
  1 message
• Chris and Adam, *LINK* -- Pam Niedermayer - Austin, TX -- Tuesday, 4 December 2007, at 11:18 p.m.
  22 messages -- Newest posted Sunday, 9 December 2007, at 11:43 p.m.
• Walentine? -- Paul Kierstead -- Tuesday, 4 December 2007, at 11:24 p.m.
  1 message
• Hollows and Rounds with Todd Herrli -- Jack Guzman from Maine -- Wednesday, 5 December 2007, at 5:13 a.m.
  8 messages -- Newest posted Wednesday, 5 December 2007, at 10:19 p.m.
• chip breaker/cap iron or not? -- Mike Schwing from Md. -- Wednesday, 5 December 2007, at 10:52 a.m.
  67 messages -- Newest posted Wednesday, 12 December 2007, at 2:05 a.m.
• how do we use this info? -- Tom Sontag - St. Louis -- Wednesday, 5 December 2007, at 4:20 p.m.
  2 messages -- Newest posted Wednesday, 5 December 2007, at 7:53 p.m.
• Another "nothing new under the sun" moment -- Bill Houghton, Sebastopol, CA, the rain's here -- Thursday, 6 December 2007, at 1:45 p.m.
  9 messages -- Newest posted Thursday, 6 December 2007, at 10:20 p.m.
• Hamler scraper inserts -- dave brown -- Thursday, 6 December 2007, at 4:17 p.m.
  7 messages -- Newest posted Friday, 7 December 2007, at 4:30 p.m.
• Only 3 Days Left – Auction Pen *LINK* -- Jim Shaver - Oakville, Ontario -- Thursday, 6 December 2007, at 8:00 p.m.
  1 message
• How do I make this box? *PIC* -- HB -- Thursday, 6 December 2007, at 8:41 p.m.
  28 messages -- Newest posted Sunday, 9 December 2007, at 10:44 p.m.
• Stephen Proctor-Marc Adams School -- Tony Sade (Charleston, WV) -- Friday, 7 December 2007, at 11:14 a.m.
  4 messages -- Newest posted Monday, 10 December 2007, at 4:36 p.m.
• A fine example of hand tool work... *LINK* -- Denny -- Friday, 7 December 2007, at 5:26 p.m.
  2 messages -- Newest posted Monday, 10 December 2007, at 12:20 p.m.
• Question for Chris Scholz *LINK* -- Wiley Horne -- Friday, 7 December 2007, at 5:55 p.m.
  19 messages -- Newest posted Thursday, 13 December 2007, at 7:01 a.m.
• finishing problem -- Les Winter -- Saturday, 8 December 2007, at 12:43 p.m.
  5 messages -- Newest posted Sunday, 9 December 2007, at 10:51 a.m.
• Benefit Auction Posting -- HC Sakman -- Saturday, 8 December 2007, at 2:07 p.m.
  2 messages -- Newest posted Monday, 10 December 2007, at 5:05 a.m.
• WC Benefit Christmas Auction, Last Day *LINK* -- Jim Shaver - Oakville, Ontario -- Sunday, 9 December 2007, at 10:57 a.m.
  1 message
• Tool making contest... who's actually entering? -- James Watriss -- Sunday, 9 December 2007, at 1:39 p.m.
  16 messages -- Newest posted Thursday, 13 December 2007, at 5:43 a.m.
• worm holes in plow fence *PIC* -- Jack Guzman from Maine -- Sunday, 9 December 2007, at 4:47 p.m.
  13 messages -- Newest posted Monday, 10 December 2007, at 7:23 p.m.
• women in woodworking - don't flame me. *LINK* *PIC* -- r fulton -- Sunday, 9 December 2007, at 5:34 p.m.
  24 messages -- Newest posted Tuesday, 11 December 2007, at 11:43 p.m.
• Veritas Smoother Planes -- Dan Collins -- Sunday, 9 December 2007, at 6:04 p.m.
  9 messages -- Newest posted Monday, 10 December 2007, at 9:50 a.m.
• Woodworking Shows, Grrrrrrr -- iew -- Monday, 10 December 2007, at 10:15 a.m.
  1 message
• Early Xmas *PIC* -- Kevin French, Antrim, NH -- Monday, 10 December 2007, at 12:14 p.m.
  12 messages -- Newest posted Thursday, 13 December 2007, at 4:05 p.m.
• Wormholes, bevel up and women in woodworking! -- Roy Anderson -- Monday, 10 December 2007, at 1:06 p.m.
  2 messages -- Newest posted Tuesday, 11 December 2007, at 1:27 p.m.
• wood for dovetail saw handle -- David W -- Monday, 10 December 2007, at 4:24 p.m.
  5 messages -- Newest posted Tuesday, 11 December 2007, at 2:08 p.m.
• Veritas in Trouble? -- James Durham -- Monday, 10 December 2007, at 5:59 p.m.
  13 messages -- Newest posted Friday, 14 December 2007, at 3:06 p.m.
• A friend told me to drop by and share this picture -- Ed Beck -- Monday, 10 December 2007, at 6:47 p.m.
  10 messages -- Newest posted Tuesday, 11 December 2007, at 9:03 p.m.
• I. Sorby dates? -- Wiley Horne -- Tuesday, 11 December 2007, at 4:39 a.m.
  4 messages -- Newest posted Tuesday, 11 December 2007, at 11:57 p.m.
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 11 December 2007, at 7:19 a.m.
  1 message
• Plane "Handing"? *LINK* -- David Miller from Iowa -- Tuesday, 11 December 2007, at 9:00 a.m.
  6 messages -- Newest posted Wednesday, 12 December 2007, at 11:55 a.m.
• Re: "I know liitle about boat building..." -- DONALD THOMPSON -- Tuesday, 11 December 2007, at 11:07 a.m.
  1 message
• New web page *LINK* -- scottg -- Tuesday, 11 December 2007, at 11:23 a.m.
  2 messages -- Newest posted Tuesday, 11 December 2007, at 12:31 p.m.
• Mujingfang planes...assimilated by the Borg? *PIC* -- Don in Northern Arizona -- Tuesday, 11 December 2007, at 4:27 p.m.
  23 messages -- Newest posted Tuesday, 18 December 2007, at 11:37 p.m.
• German Beech -- GregForster -- Tuesday, 11 December 2007, at 6:24 p.m.
  7 messages -- Newest posted Wednesday, 12 December 2007, at 6:02 p.m.
• Woodworking Magazine site down -- Christopher Schwarz -- Wednesday, 12 December 2007, at 9:24 a.m.
  3 messages -- Newest posted Wednesday, 12 December 2007, at 12:28 p.m.
• Laser Guided Handsaw *LINK* -- Jake J. (Windsor, Ontario) -- Wednesday, 12 December 2007, at 3:35 p.m.
  2 messages -- Newest posted Wednesday, 12 December 2007, at 4:41 p.m.
• LV - LN Bevel Up Plane Comparison? -- David Cockey -- Wednesday, 12 December 2007, at 6:01 p.m.
  6 messages -- Newest posted Wednesday, 12 December 2007, at 10:27 p.m.
• Very cool episode of Dirty Jobs -- Jay Samuels -- Wednesday, 12 December 2007, at 7:15 p.m.
  5 messages -- Newest posted Thursday, 13 December 2007, at 10:16 p.m.
• LN 8 vs Veritas BU Jointer -- Jim Shaver - Oakville, Ontario -- Wednesday, 12 December 2007, at 10:46 p.m.
  55 messages -- Newest posted Tuesday, 18 December 2007, at 11:54 p.m.
• Workbench tops -- Stephen Shepherd in the State of Deseret -- Thursday, 13 December 2007, at 7:46 a.m.
  15 messages -- Newest posted Friday, 28 December 2007, at 11:15 a.m.
• Hide Glue in a bottle? -- Marv -- Thursday, 13 December 2007, at 1:41 p.m.
  42 messages -- Newest posted Wednesday, 19 December 2007, at 8:46 a.m.
• Tool Gloat *PIC* -- Stephen Shepherd in the State of Deseret -- Thursday, 13 December 2007, at 5:32 p.m.
  2 messages -- Newest posted Friday, 14 December 2007, at 1:46 p.m.
• Powder coating vs. jappaning -- Michael Brady -- Thursday, 13 December 2007, at 6:00 p.m.
  11 messages -- Newest posted Monday, 17 December 2007, at 5:50 p.m.
• White Bronze #1 Lie-Nielsen on the Bay *LINK* -- Chad Pearson -- Thursday, 13 December 2007, at 7:49 p.m.
  6 messages -- Newest posted Monday, 17 December 2007, at 5:52 p.m.
• Prayers for Alan Bierbaum -- Ellis Walentine -- Friday, 14 December 2007, at 2:02 a.m.
  10 messages -- Newest posted Sunday, 16 December 2007, at 2:04 a.m.
• Merry Christmas from Loki *PIC* -- Moses Yoder in White Pigeon, MI -- Friday, 14 December 2007, at 5:01 p.m.
  6 messages -- Newest posted Monday, 17 December 2007, at 12:27 p.m.
• Why I love Tasmanian Blackwood *PIC* -- Derek Cohen (in Perth, Australia) -- Saturday, 15 December 2007, at 9:01 a.m.
  9 messages -- Newest posted Sunday, 16 December 2007, at 2:19 p.m.
• Hey it actually works! *PIC* -- Mike Schwing from Maryland -- Saturday, 15 December 2007, at 5:05 p.m.
  9 messages -- Newest posted Wednesday, 19 December 2007, at 1:32 p.m.
• A Hotdog for a LV LAJ -- Derek Cohen (in Perth, Australia) -- Sunday, 16 December 2007, at 12:22 a.m.
  15 messages -- Newest posted Tuesday, 18 December 2007, at 8:00 p.m.
• Reading Your Boards- #1 checks *LINK* -- Bill Tindall, E.TN -- Sunday, 16 December 2007, at 12:03 p.m.
  2 messages -- Newest posted Sunday, 16 December 2007, at 12:05 p.m.
• Help me ID this brace *LINK* *PIC* -- David Miller from Iowa -- Sunday, 16 December 2007, at 2:33 p.m.
  4 messages -- Newest posted Wednesday, 19 December 2007, at 1:20 p.m.
• Plow fence repair---new issue -- Jack Guzman from Maine -- Sunday, 16 December 2007, at 7:40 p.m.
  19 messages -- Newest posted Wednesday, 19 December 2007, at 5:29 p.m.
• Returning after hiatus, with frame saw question -- Peter Berglund -- Monday, 17 December 2007, at 7:34 p.m.
  9 messages -- Newest posted Thursday, 20 December 2007, at 11:31 a.m.
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 18 December 2007, at 7:28 a.m.
  1 message
• Daddy can't afford no Christmas here... -- Patrick Gibbons, Houston, TX -- Tuesday, 18 December 2007, at 8:18 a.m.
  6 messages -- Newest posted Friday, 21 December 2007, at 10:42 a.m.
• Hollows & Rounds -- Kevin Adams -- Tuesday, 18 December 2007, at 11:47 a.m.
  10 messages -- Newest posted Wednesday, 19 December 2007, at 1:15 p.m.
• Stanley/Bailey #7 Blade -- Nick Tuzzolino -- Tuesday, 18 December 2007, at 1:02 p.m.
  11 messages -- Newest posted Wednesday, 19 December 2007, at 11:50 a.m.
• Just "plane" level -- Marv -- Tuesday, 18 December 2007, at 2:51 p.m.
  35 messages -- Newest posted Friday, 21 December 2007, at 6:52 p.m.
• Monhagen Saw Works image needed -- toolemera -- Tuesday, 18 December 2007, at 8:52 p.m.
  5 messages -- Newest posted Thursday, 20 December 2007, at 2:06 p.m.
• Samauri Plane Blades? -- Tom MacGregor -- Wednesday, 19 December 2007, at 12:05 p.m.
  3 messages -- Newest posted Wednesday, 19 December 2007, at 7:49 p.m.
• A new low in tool making. -- Paul Kierstead -- Wednesday, 19 December 2007, at 4:59 p.m.
  63 messages -- Newest posted Thursday, 3 January 2008, at 1:46 p.m.
• New Schwarz workbench chapter *LINK* *PIC* -- Alan S -- Wednesday, 19 December 2007, at 5:13 p.m.
  3 messages -- Newest posted Thursday, 20 December 2007, at 1:15 p.m.
• Alan Bierbaum is gone -- Ellis Walentine -- Wednesday, 19 December 2007, at 5:28 p.m.
  7 messages -- Newest posted Friday, 21 December 2007, at 10:59 a.m.
• Stanley 95 Butt Gauge *PIC* -- Ted Owen, Pittsburgh -- Wednesday, 19 December 2007, at 10:24 p.m.
  10 messages -- Newest posted Sunday, 23 December 2007, at 7:05 p.m.
• legs not level -- chichi -- Thursday, 20 December 2007, at 12:31 a.m.
  8 messages -- Newest posted Friday, 28 December 2007, at 6:15 a.m.
• OT 'bay selling strategy? -- cooper suter -- Thursday, 20 December 2007, at 9:05 a.m.
  11 messages -- Newest posted Saturday, 22 December 2007, at 7:33 a.m.
• Bug Barton spokeshave *LINK* -- Todd O. Cronkhite Maine Native, Presently Away -- Thursday, 20 December 2007, at 3:40 p.m.
  7 messages -- Newest posted Friday, 21 December 2007, at 8:15 p.m.
• To Rob Lee re: tool collection -- Jack Guzman from Maine -- Thursday, 20 December 2007, at 5:59 p.m.
  17 messages -- Newest posted Monday, 24 December 2007, at 6:57 p.m.
• Christmas Memories, Fuller Brush and Ergonomics -- Patrick Gibbons, Houston, TX -- Friday, 21 December 2007, at 10:10 a.m.
  2 messages -- Newest posted Sunday, 23 December 2007, at 7:07 p.m.
• Card scraper material sources? -- Mike Schwing from Md. -- Friday, 21 December 2007, at 11:12 a.m.
  5 messages -- Newest posted Saturday, 22 December 2007, at 5:41 a.m.
• Misugi is gone :-( -- Denis Chénard, Orléans, Ont. -- Friday, 21 December 2007, at 12:13 p.m.
  19 messages -- Newest posted Tuesday, 25 December 2007, at 9:08 p.m.
• 289 Cosmetic Surgery . . . *PIC* -- steve mackay -- Friday, 21 December 2007, at 4:53 p.m.
  3 messages -- Newest posted Friday, 21 December 2007, at 7:39 p.m.
• This is the story... *LINK* -- Rob Lee -- Friday, 21 December 2007, at 7:24 p.m.
  9 messages -- Newest posted Tuesday, 25 December 2007, at 9:47 a.m.
• Favorite wrapping paper *PIC* -- Moses Yoder in White Pigeon, MI -- Saturday, 22 December 2007, at 6:12 a.m.
  4 messages -- Newest posted Sunday, 23 December 2007, at 7:33 a.m.
• 289 cap . . . -- steve mackay -- Saturday, 22 December 2007, at 2:16 p.m.
  3 messages -- Newest posted Saturday, 22 December 2007, at 6:49 p.m.
• Trouble with a 605 and blade advancing -- Dominic Greco in Richboro PA -- Saturday, 22 December 2007, at 6:51 p.m.
  8 messages -- Newest posted Monday, 24 December 2007, at 6:41 a.m.
• Wood boring gimlets -- flutegimlet -- Saturday, 22 December 2007, at 9:52 p.m.
  19 messages -- Newest posted Sunday, 30 December 2007, at 12:14 a.m.
• Lighthouse Service tool box *LINK* -- Ken Martin -- Monday, 24 December 2007, at 3:16 a.m.
  5 messages -- Newest posted Tuesday, 25 December 2007, at 9:58 p.m.
• Early Christmas gloat? *PIC* -- Mike Schwing from Maryland -- Monday, 24 December 2007, at 9:43 a.m.
  6 messages -- Newest posted Thursday, 27 December 2007, at 4:34 p.m.
• Chinese vs. British mortise gauges -- Bill Houghton, Sebastopol, CA -- Monday, 24 December 2007, at 2:24 p.m.
  18 messages -- Newest posted Monday, 31 December 2007, at 4:23 p.m.
• Happy holidays and thanks -- Bill Houghton, Sebastopol, CA -- Monday, 24 December 2007, at 2:29 p.m.
  2 messages -- Newest posted Monday, 24 December 2007, at 6:46 p.m.
• Merry Christmas to all! -- Denis Chénard, Orléans, Ont. -- Tuesday, 25 December 2007, at 12:07 a.m.
  1 message
• Merry Christmas ! -- Stuart Hough -- Tuesday, 25 December 2007, at 6:57 p.m.
  1 message
• Come here dear boy, have a cigar... -- Denis Chénard, Orléans, Ont. -- Wednesday, 26 December 2007, at 1:49 a.m.
  7 messages -- Newest posted Friday, 28 December 2007, at 8:04 p.m.
• Teach me to use a draw knife, please *PIC* -- ChuckS -- Wednesday, 26 December 2007, at 4:02 p.m.
  12 messages -- Newest posted Friday, 28 December 2007, at 10:54 a.m.
• Hats off to David Jeske! *PIC* -- Scott Burr in Ben Lomond, CA -- Wednesday, 26 December 2007, at 4:42 p.m.
  18 messages -- Newest posted Tuesday, 1 January 2008, at 5:14 p.m.
• I want to get some hold downs, any recommencations -- Roy Anderson -- Wednesday, 26 December 2007, at 4:51 p.m.
  15 messages -- Newest posted Thursday, 27 December 2007, at 3:56 p.m.
• Font size -- Jack Guzman from Maine -- Wednesday, 26 December 2007, at 5:12 p.m.
  7 messages -- Newest posted Thursday, 27 December 2007, at 6:59 a.m.
• ATTN: Paul Cates -- Todd O. Cronkhite Maine Native, Presently Away -- Wednesday, 26 December 2007, at 5:38 p.m.
  1 message
• Been gone...back... slightly OT -- Mike G. in SC -- Thursday, 27 December 2007, at 9:07 p.m.
  2 messages -- Newest posted Thursday, 27 December 2007, at 10:22 p.m.
• Camellia oil (!) -- Moses Yoder in White Pigeon, MI -- Friday, 28 December 2007, at 6:58 a.m.
  24 messages -- Newest posted Monday, 31 December 2007, at 7:58 p.m.
• In the "never thought of that" category... -- Denis Chénard, Orléans, Ont. -- Friday, 28 December 2007, at 10:27 p.m.
  1 message
• New Web Site... *LINK* -- Stephen Shepherd in the State of Deseret -- Saturday, 29 December 2007, at 12:16 p.m.
  6 messages -- Newest posted Monday, 31 December 2007, at 11:01 a.m.
• A handle for my burnisher -- Dominic Greco in Richboro PA -- Saturday, 29 December 2007, at 10:34 p.m.
  4 messages -- Newest posted Sunday, 30 December 2007, at 8:22 p.m.
• New sharpening system... -- Mark Harrison - Brisbane, Australia -- Sunday, 30 December 2007, at 7:08 a.m.
  22 messages -- Newest posted Saturday, 5 January 2008, at 10:47 p.m.
• How I spent $80 today *PIC* -- Todd O. Cronkhite Maine Native, Presently Away -- Sunday, 30 December 2007, at 3:30 p.m.
  26 messages -- Newest posted Tuesday, 1 January 2008, at 10:16 p.m.
• Hey Bill, they're clamps *PIC* -- Todd O. Cronkhite Maine Native, Presently Away -- Sunday, 30 December 2007, at 3:58 p.m.
  11 messages -- Newest posted Tuesday, 1 January 2008, at 11:27 p.m.
• Tetsunosuke saws on eBay - Chance of a lifetime? *LINK* -- Denis Chénard, Orléans, Ont. -- Sunday, 30 December 2007, at 4:32 p.m.
  44 messages -- Newest posted Wednesday, 2 January 2008, at 2:34 p.m.
• Planing Problems -- Jay St. Peter - SoMD -- Monday, 31 December 2007, at 7:48 a.m.
  16 messages -- Newest posted Saturday, 5 January 2008, at 9:48 a.m.
• Chris Schwarz, Thank You! -- Stuart Hough -- Monday, 31 December 2007, at 11:55 a.m.
  12 messages -- Newest posted Wednesday, 2 January 2008, at 6:00 p.m.
• anybody see Antique Road Show? -- Bill Tindall, E.TN -- Monday, 31 December 2007, at 10:45 p.m.
  14 messages -- Newest posted Tuesday, 1 January 2008, at 9:06 p.m.
• Happy New Year! -- Scott Burr in cold Ben Lomond, CA -- Tuesday, 1 January 2008, at 3:06 a.m.
  18 messages -- Newest posted Thursday, 3 January 2008, at 9:14 a.m.
• How I've spent my New Year's Day -- Bill Houghton, chillyish Sebastopol, CA -- Tuesday, 1 January 2008, at 6:12 p.m.
  20 messages -- Newest posted Thursday, 3 January 2008, at 1:56 p.m.
• holding down long/wide boards? -- Dominic Greco in Richboro PA -- Tuesday, 1 January 2008, at 8:23 p.m.
  21 messages -- Newest posted Thursday, 3 January 2008, at 11:33 a.m.
• Searching for Thoreau -- Todd O. Cronkhite Maine Native, Presently Away -- Tuesday, 1 January 2008, at 8:32 p.m.
  46 messages -- Newest posted Thursday, 3 January 2008, at 11:10 p.m.
• Some quantitative data on diamond sharpening -- Bill Tindall, E.TN -- Wednesday, 2 January 2008, at 6:49 p.m.
  13 messages -- Newest posted Friday, 4 January 2008, at 9:31 a.m.
• Homebuilt lathe 1of 5 *PIC* -- Todd O. Cronkhite Maine Native, Presently Away -- Wednesday, 2 January 2008, at 8:36 p.m.
  23 messages -- Newest posted Saturday, 5 January 2008, at 11:06 a.m.
• GREAT video: hardwood edges on plywood -- Dominic Greco in Richboro PA -- Wednesday, 2 January 2008, at 9:35 p.m.
  4 messages -- Newest posted Friday, 4 January 2008, at 1:08 p.m.
• Optical neander shop aid--great for filing DT saws *LINK* -- David Barnett - SW Florida -- Thursday, 3 January 2008, at 10:19 a.m.
  4 messages -- Newest posted Friday, 4 January 2008, at 11:35 a.m.
• Is this a bargain? *LINK* -- Marv -- Thursday, 3 January 2008, at 10:31 a.m.
  29 messages -- Newest posted Sunday, 6 January 2008, at 10:42 p.m.
• Hardwood floor expansion -- David Miller from Iowa -- Thursday, 3 January 2008, at 2:37 p.m.
  4 messages -- Newest posted Friday, 4 January 2008, at 1:52 p.m.
• free walnut chestnut Vancouver -- redcoat -- Thursday, 3 January 2008, at 3:38 p.m.
  1 message
• Sliding bevel gauge question -- Nathan Pettigrew -- Thursday, 3 January 2008, at 4:52 p.m.
  5 messages -- Newest posted Friday, 4 January 2008, at 2:47 p.m.
• Neander buddy needs a new blade. -- Scott Burr in Ben Lomond CA -- Friday, 4 January 2008, at 2:03 p.m.
  11 messages -- Newest posted Sunday, 6 January 2008, at 2:03 a.m.
• Brace Till Ideas? *PIC* -- David Miller from Iowa -- Friday, 4 January 2008, at 5:43 p.m.
  15 messages -- Newest posted Sunday, 6 January 2008, at 6:29 a.m.
• Can Anyone Offer A Review of LV Spoon Bits? -- Tom Colligan -- Friday, 4 January 2008, at 10:37 p.m.
  3 messages -- Newest posted Friday, 11 January 2008, at 12:51 p.m.
• Preparing a board without a thicknesser-planer-joi *LINK* -- Derek Cohen (in Perth, Australia) -- Saturday, 5 January 2008, at 5:42 a.m.
  7 messages -- Newest posted Sunday, 6 January 2008, at 7:37 p.m.
• wooden plow revisited *PIC* -- Jack Guzman from Maine -- Saturday, 5 January 2008, at 8:25 a.m.
  8 messages -- Newest posted Sunday, 6 January 2008, at 12:31 p.m.
• Unknown Hardware find *PIC* -- Kevin French, Antrim, NH -- Saturday, 5 January 2008, at 8:41 a.m.
  14 messages -- Newest posted Monday, 7 January 2008, at 12:07 p.m.
• Info on making wood snowshoes? -- Dave Mount -- Saturday, 5 January 2008, at 2:04 p.m.
  15 messages -- Newest posted Saturday, 12 January 2008, at 6:59 p.m.
• Stanley Four Square Tools -- David Miller from Iowa -- Saturday, 5 January 2008, at 5:04 p.m.
  1 message
• Re: Holding down boards? What I ended up with -- Dominic Greco in Richboro PA -- Saturday, 5 January 2008, at 8:49 p.m.
  10 messages -- Newest posted Monday, 7 January 2008, at 1:54 p.m.
• Chisel handles ala Schwarz/cherubini -- HB -- Saturday, 5 January 2008, at 9:12 p.m.
  5 messages -- Newest posted Tuesday, 8 January 2008, at 10:21 a.m.
• Leon Robbins Levels *PIC* -- Greg Earley -- Saturday, 5 January 2008, at 10:43 p.m.
  3 messages -- Newest posted Sunday, 6 January 2008, at 1:33 a.m.
• cabinet scraper or scraping plane? -- Doug Boor -- Sunday, 6 January 2008, at 2:44 a.m.
  4 messages -- Newest posted Sunday, 6 January 2008, at 10:02 p.m.
• One potential origin of the Neander term... -- Mark Harrison - Brisbane, Australia -- Sunday, 6 January 2008, at 6:16 a.m.
  1 message
• Annual Va Breakfast Saturday! -- Joe Rogers, Northern Virginia -- Sunday, 6 January 2008, at 10:20 a.m.
  13 messages -- Newest posted Friday, 11 January 2008, at 7:10 p.m.
• Turning Saws -- Paul in NJ -- Sunday, 6 January 2008, at 11:27 a.m.
  24 messages -- Newest posted Thursday, 10 January 2008, at 9:58 a.m.
• Three stones...Can somebody explain to -- VLParisian -- Sunday, 6 January 2008, at 12:20 p.m.
  7 messages -- Newest posted Thursday, 10 January 2008, at 9:42 a.m.
• Weekend Project *PIC* -- Kevin French, Antrim, NH -- Sunday, 6 January 2008, at 8:34 p.m.
  3 messages -- Newest posted Monday, 7 January 2008, at 8:24 p.m.
• Congratulations Mike Schwing! -- Chris K in MD -- Sunday, 6 January 2008, at 8:55 p.m.
  7 messages -- Newest posted Monday, 7 January 2008, at 5:46 p.m.
• Chris Schwarz--so many good tips! -- Roy Anderson -- Tuesday, 8 January 2008, at 5:59 a.m.
  3 messages -- Newest posted Tuesday, 8 January 2008, at 2:50 p.m.
• Nesting Tables progress report *PIC* -- Roy Anderson -- Tuesday, 8 January 2008, at 6:28 a.m.
  5 messages -- Newest posted Thursday, 10 January 2008, at 7:03 p.m.
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 8 January 2008, at 7:31 a.m.
  1 message
• Thanks Derek -- James Watriss -- Tuesday, 8 January 2008, at 11:39 a.m.
  1 message
• Shellac Source -- Tony - Memphis -- Tuesday, 8 January 2008, at 3:48 p.m.
  16 messages -- Newest posted Thursday, 10 January 2008, at 6:11 p.m.
• Ever wonder how the old timers... *PIC* -- Stephen Shepherd in the State of Deseret -- Tuesday, 8 January 2008, at 7:16 p.m.
  14 messages -- Newest posted Thursday, 10 January 2008, at 10:07 a.m.
• Made me a plane *PIC* -- Wayne -- Tuesday, 8 January 2008, at 10:52 p.m.
  10 messages -- Newest posted Thursday, 10 January 2008, at 8:51 a.m.
• OT - Access to Crown Plane web site -- TiO -- Wednesday, 9 January 2008, at 9:21 a.m.
  4 messages -- Newest posted Wednesday, 9 January 2008, at 5:44 p.m.
• Tools Near Lansdale, PA -- Bob R. -- Wednesday, 9 January 2008, at 10:17 a.m.
  10 messages -- Newest posted Thursday, 10 January 2008, at 11:54 p.m.
• An easy way to apply shellac -- Bill Tindall, E.TN -- Wednesday, 9 January 2008, at 10:39 a.m.
  14 messages -- Newest posted Friday, 11 January 2008, at 4:43 p.m.
• Why I hate my buddy 1of 3 *PIC* -- Todd O. Cronkhite Maine Native, Presently Away -- Wednesday, 9 January 2008, at 1:20 p.m.
  7 messages -- Newest posted Wednesday, 9 January 2008, at 7:12 p.m.
• bedrock 602/need parts -- Jack from Copperhill -- Wednesday, 9 January 2008, at 1:44 p.m.
  7 messages -- Newest posted Friday, 11 January 2008, at 5:10 p.m.
• HUH? *LINK* -- Rocky Constable -- Wednesday, 9 January 2008, at 8:18 p.m.
  9 messages -- Newest posted Saturday, 12 January 2008, at 1:30 p.m.
• FW Tools and Shops -- Kevin French, Antrim, NH -- Wednesday, 9 January 2008, at 8:54 p.m.
  5 messages -- Newest posted Friday, 11 January 2008, at 5:01 p.m.
• Really cheap glue brush *PIC* -- Stephen Shepherd in the State of Deseret -- Thursday, 10 January 2008, at 8:06 a.m.
  12 messages -- Newest posted Sunday, 13 January 2008, at 2:37 p.m.
• Site Black Spray for saw sharpening? -- Tony - Memphis -- Thursday, 10 January 2008, at 12:25 p.m.
  14 messages -- Newest posted Friday, 18 January 2008, at 7:10 p.m.
• New blade for an old Plane (woodie)?? -- HB -- Thursday, 10 January 2008, at 4:48 p.m.
  8 messages -- Newest posted Friday, 11 January 2008, at 10:24 p.m.
• User Profile -- Stephen Shepherd in the State of Deseret -- Thursday, 10 January 2008, at 10:38 p.m.
  15 messages -- Newest posted Tuesday, 15 January 2008, at 11:36 p.m.
• Plane is by "J. Engle"??? -- HB -- Friday, 11 January 2008, at 8:49 a.m.
  2 messages -- Newest posted Friday, 11 January 2008, at 5:17 p.m.
• Where'd Dean J's bench article go? -- paul womack -- Friday, 11 January 2008, at 11:54 a.m.
  6 messages -- Newest posted Friday, 11 January 2008, at 2:32 p.m.
• length of burnisher shaft -- Bill Houghton, Sebastopol, CA -- Friday, 11 January 2008, at 1:13 p.m.
  14 messages -- Newest posted Saturday, 12 January 2008, at 6:40 a.m.
• Sweet (DEC10) -- Moses Yoder in White Pigeon, MI -- Saturday, 12 January 2008, at 7:01 a.m.
  10 messages -- Newest posted Sunday, 13 January 2008, at 6:34 a.m.
• Japaning - didn't write it on the can . . . -- steve mackay -- Saturday, 12 January 2008, at 7:23 p.m.
  6 messages -- Newest posted Monday, 14 January 2008, at 4:10 p.m.
• First documented use of Hide Glue *PIC* -- Stephen Shepherd in the State of Deseret -- Sunday, 13 January 2008, at 2:41 p.m.
  3 messages -- Newest posted Sunday, 13 January 2008, at 4:46 p.m.
• DT's - Cut to line, on line, next to... -- Joe in a Cleveland Suburb -- Sunday, 13 January 2008, at 9:52 p.m.
  44 messages -- Newest posted Friday, 18 January 2008, at 4:12 a.m.
• SIX New Shop Shots -- David Yoho -- Monday, 14 January 2008, at 8:16 a.m.
  1 message
• more info on 602 bedrock *PIC* -- Jack from Copperhill -- Monday, 14 January 2008, at 11:49 a.m.
  5 messages -- Newest posted Monday, 14 January 2008, at 2:19 p.m.
• Thanks Chris S. Now I have to build another bench -- Stephen Kirk in Quakertown, PA -- Monday, 14 January 2008, at 11:58 a.m.
  30 messages -- Newest posted Friday, 18 January 2008, at 5:08 p.m.
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 15 January 2008, at 7:11 a.m.
  1 message
• Williamsburg Nicholson Bench - Dimensions? -- Jeff S. -- Tuesday, 15 January 2008, at 11:24 a.m.
  4 messages -- Newest posted Friday, 18 January 2008, at 9:50 a.m.
• busted bessey clamps -- les winter -- Tuesday, 15 January 2008, at 11:30 a.m.
  6 messages -- Newest posted Tuesday, 15 January 2008, at 10:41 p.m.
• Toothed blades -- Denis Chénard, Orléans, Ont. -- Tuesday, 15 January 2008, at 2:49 p.m.
  30 messages -- Newest posted Thursday, 24 January 2008, at 12:42 p.m.
• More bench discussion *LINK* -- Alan Schwabacher -- Tuesday, 15 January 2008, at 4:14 p.m.
  2 messages -- Newest posted Tuesday, 15 January 2008, at 5:54 p.m.
• bench flatness--Cris how do you do it? -- McKay Sleight -- Tuesday, 15 January 2008, at 5:05 p.m.
  30 messages -- Newest posted Monday, 21 January 2008, at 4:29 a.m.
• Try plane -- McKay -- Tuesday, 15 January 2008, at 7:03 p.m.
  11 messages -- Newest posted Thursday, 17 January 2008, at 4:22 p.m.
• grinding a plane blade? -- Charles Jackson III -- Tuesday, 15 January 2008, at 8:53 p.m.
  4 messages -- Newest posted Wednesday, 16 January 2008, at 5:35 p.m.
• Old Home made plane? *PIC* -- Todd O. Cronkhite Maine Native, Presently Away -- Friday, 11 January 2008, at 6:36 p.m.
  4 messages -- Newest posted Thursday, 17 January 2008, at 9:29 a.m.
• Multiple face hand plane *LINK* -- Robert Henderson -- Wednesday, 16 January 2008, at 8:23 a.m.
  11 messages -- Newest posted Thursday, 17 January 2008, at 11:03 p.m.
• Way off Topic but you need a laugh -- ron in Kokomo -- Wednesday, 16 January 2008, at 2:23 p.m.
  13 messages -- Newest posted Thursday, 17 January 2008, at 6:20 p.m.
• [AD] Subscribe to Woodworking Magazine! -- Ellis Walentine -- Thursday, 17 January 2008, at 10:15 a.m.
  1 message
• Concensus request: *PIC* -- Marv -- Thursday, 17 January 2008, at 12:18 p.m.
  44 messages -- Newest posted Sunday, 16 March 2008, at 3:29 a.m.
• Planing thin lumber on bench of unknown flatness -- Bill Tindall, E.TN -- Thursday, 17 January 2008, at 5:00 p.m.
  13 messages -- Newest posted Saturday, 19 January 2008, at 7:07 a.m.
• Well, Mr. Schwartz, I'm impressed... -- Denis Chénard, Orléans, Ont. -- Thursday, 17 January 2008, at 5:25 p.m.
  5 messages -- Newest posted Friday, 18 January 2008, at 6:20 a.m.
• help selecting marking gauge -- jon gaynor -- Friday, 18 January 2008, at 6:30 a.m.
  24 messages -- Newest posted Thursday, 24 January 2008, at 9:55 p.m.
• Closeout on WC Fleece Jackets! *LINK* *PIC* -- Ellis Walentine -- Friday, 18 January 2008, at 8:20 a.m.
  2 messages -- Newest posted Friday, 18 January 2008, at 5:50 p.m.
• Angle of saw (dumbness confession) -- Bill Houghton, sunny Sebastopol, CA -- Friday, 18 January 2008, at 4:03 p.m.
  2 messages -- Newest posted Friday, 18 January 2008, at 6:19 p.m.
• Drive by Vacation Gloat -- David Miller from Iowa -- Friday, 18 January 2008, at 6:40 p.m.
  3 messages -- Newest posted Saturday, 19 January 2008, at 12:45 p.m.
• How to use a Stanley #50 -- Lee Schierer - McKean, PA -- Friday, 18 January 2008, at 7:36 p.m.
  6 messages -- Newest posted Monday, 21 January 2008, at 4:44 a.m.
• How was squareness determined in 1750? -- Bill Tindall, E.TN -- Saturday, 19 January 2008, at 4:52 p.m.
  16 messages -- Newest posted Wednesday, 23 January 2008, at 6:27 a.m.
• First Draft *PIC* -- Jack Guzman from Maine -- Saturday, 19 January 2008, at 6:58 p.m.
  14 messages -- Newest posted Monday, 21 January 2008, at 6:43 a.m.
• Frank Miller Lumber Mill Tour *LINK* -- Jennifer@Indy.USA -- Saturday, 19 January 2008, at 9:24 p.m.
  3 messages -- Newest posted Sunday, 20 January 2008, at 2:09 p.m.
• Salvage from the firewood pile *PIC* -- Dave Mount -- Sunday, 20 January 2008, at 12:19 a.m.
  17 messages -- Newest posted Sunday, 20 January 2008, at 7:06 p.m.
• Tool List and Reference Works on Moulding Planes -- George Bustamante -- Sunday, 20 January 2008, at 7:46 a.m.
  4 messages -- Newest posted Monday, 21 January 2008, at 1:04 p.m.
• H.Boker&co. plane iron -- Jack Guzman from Maine -- Sunday, 20 January 2008, at 8:17 a.m.
  3 messages -- Newest posted Sunday, 20 January 2008, at 8:27 p.m.
• ***SURVEY: THE IDES OF JANUARY*** -- Ellis Walentine -- Sunday, 20 January 2008, at 9:28 a.m.
  15 messages -- Newest posted Wednesday, 23 January 2008, at 3:51 p.m.
• Mr. Jack Zimmernan . . . -- steve mackay -- Sunday, 20 January 2008, at 6:29 p.m.
  9 messages -- Newest posted Monday, 21 January 2008, at 7:43 p.m.
• Shellac/Wax Finishing Question -- Dave (Arlington, VA) -- Sunday, 20 January 2008, at 9:39 p.m.
  18 messages -- Newest posted Tuesday, 22 January 2008, at 8:34 a.m.
• New toy *PIC* -- Dan Donaldson -- Monday, 21 January 2008, at 12:48 a.m.
  4 messages -- Newest posted Monday, 21 January 2008, at 5:29 p.m.
• TWO AWESOME New Shop Shots -- David Yoho -- Monday, 21 January 2008, at 8:57 a.m.
  1 message
• I Could Use a Hand -- Tom MacGregor -- Monday, 21 January 2008, at 10:57 a.m.
  10 messages -- Newest posted Wednesday, 23 January 2008, at 8:54 p.m.
• Steam Powered Sawmill -- Mike Fitterling -- Monday, 21 January 2008, at 1:55 p.m.
  18 messages -- Newest posted Thursday, 24 January 2008, at 10:51 p.m.
• What is up with this? *LINK* -- David Miller from Iowa -- Monday, 21 January 2008, at 10:01 p.m.
  10 messages -- Newest posted Wednesday, 23 January 2008, at 5:24 a.m.
• Closed Saw Handle and tales of the lamb... *LINK* *PIC* -- Alan DuBoff -- Tuesday, 22 January 2008, at 3:57 a.m.
  21 messages -- Newest posted Sunday, 27 January 2008, at 2:10 p.m.
• Woodworking al fresco -- Derek Cohen (in Perth, Australia) -- Tuesday, 22 January 2008, at 7:14 a.m.
  4 messages -- Newest posted Tuesday, 22 January 2008, at 4:34 p.m.
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 22 January 2008, at 7:24 a.m.
  1 message
• Spokeshave Recommendation -- Jerry Draper -- Tuesday, 22 January 2008, at 12:01 p.m.
  10 messages -- Newest posted Wednesday, 23 January 2008, at 9:08 p.m.
• Worksharp Vrs. Lee Valley machine -- Howard M -- Tuesday, 22 January 2008, at 2:45 p.m.
  11 messages -- Newest posted Thursday, 24 January 2008, at 1:13 p.m.
• York or Middle Pitch -- Hank Knight -- Tuesday, 22 January 2008, at 3:51 p.m.
  15 messages -- Newest posted Friday, 25 January 2008, at 4:03 p.m.
• how high will it go? *LINK* *PIC* -- old tool guy in san diego -- Tuesday, 22 January 2008, at 5:58 p.m.
  5 messages -- Newest posted Thursday, 24 January 2008, at 5:43 a.m.
• screwdriver query -- Bill Tindall, E.TN -- Tuesday, 22 January 2008, at 8:18 p.m.
  17 messages -- Newest posted Thursday, 24 January 2008, at 12:08 a.m.
• grits -- Dan Collins -- Wednesday, 23 January 2008, at 9:38 a.m.
  4 messages -- Newest posted Wednesday, 23 January 2008, at 2:59 p.m.
• PW honing guides review -- Gordon Thomas -- Wednesday, 23 January 2008, at 5:54 p.m.
  47 messages -- Newest posted Monday, 28 January 2008, at 8:14 p.m.
• Chester Co Chest *PIC* -- Bill Tindall, E.TN -- Wednesday, 23 January 2008, at 5:54 p.m.
  26 messages -- Newest posted Sunday, 27 January 2008, at 11:38 p.m.
• Chris Schwarz, your advice needed. -- Stuart Hough -- Thursday, 24 January 2008, at 2:03 p.m.
  15 messages -- Newest posted Saturday, 26 January 2008, at 8:07 p.m.
• Reading Your Boards- grade marks *LINK* -- Bill Tindall, E.TN -- Friday, 25 January 2008, at 1:14 p.m.
  1 message
• Alternative to Southern Yellow Pine? -- Paul Erickson -- Friday, 25 January 2008, at 1:54 p.m.
  12 messages -- Newest posted Monday, 28 January 2008, at 6:15 p.m.
• Evidence of Toothing *PIC* -- Stephen Shepherd in the State of Deseret -- Friday, 25 January 2008, at 9:03 p.m.
  15 messages -- Newest posted Tuesday, 29 January 2008, at 5:04 a.m.
• Sharpening a saw - Which file? -- Denis Chénard, Orléans, Ont. -- Saturday, 26 January 2008, at 11:01 a.m.
  26 messages -- Newest posted Monday, 28 January 2008, at 8:26 p.m.
• Core material for veneering--need help -- Wiley Horne -- So. Calif. -- Saturday, 26 January 2008, at 9:24 p.m.
  25 messages -- Newest posted Tuesday, 29 January 2008, at 5:29 p.m.
• Rock-ON!!! -- ThomD -- Sunday, 27 January 2008, at 12:49 a.m.
  3 messages -- Newest posted Sunday, 27 January 2008, at 3:07 p.m.
• Folley Filer -- ThomD -- Sunday, 27 January 2008, at 12:54 a.m.
  5 messages -- Newest posted Sunday, 27 January 2008, at 5:26 p.m.
• Beeswax & mineral oil -- Moses Yoder in White Pigeon, MI -- Sunday, 27 January 2008, at 7:14 a.m.
  4 messages -- Newest posted Wednesday, 30 January 2008, at 7:30 a.m.
• Chisels and "ruler trick" -- Bill Tindall, E.TN -- Sunday, 27 January 2008, at 10:36 a.m.
  6 messages -- Newest posted Monday, 28 January 2008, at 4:31 a.m.
• A nice little hand tool user *PIC* -- Peter Hyde -- Sunday, 27 January 2008, at 1:06 p.m.
  2 messages -- Newest posted Monday, 28 January 2008, at 11:03 p.m.
• Tool chest with turning tools inside *PIC* -- David Churnega -- Sunday, 27 January 2008, at 4:50 p.m.
  8 messages -- Newest posted Wednesday, 30 January 2008, at 4:10 a.m.
• "Peening" anvil . . . *PIC* -- steve mackay -- Sunday, 27 January 2008, at 5:00 p.m.
  14 messages -- Newest posted Thursday, 31 January 2008, at 4:26 a.m.
• Well, sharpened my first saw today... -- Denis Chénard, Orléans, Ont. -- Sunday, 27 January 2008, at 5:25 p.m.
  7 messages -- Newest posted Sunday, 3 February 2008, at 6:58 p.m.
• OT - if you repair plumbing *PIC* -- Bill Houghton, Sebastopol, CA, 4" rain/24 hou -- Sunday, 27 January 2008, at 6:23 p.m.
  4 messages -- Newest posted Monday, 28 January 2008, at 11:16 a.m.
• The Ruler Trick and stropping *PIC* -- Derek Cohen (in Perth, Australia) -- Sunday, 27 January 2008, at 11:51 p.m.
  31 messages -- Newest posted Saturday, 2 February 2008, at 6:09 a.m.
• NEW Shop Shot -- David Yoho -- Monday, 28 January 2008, at 7:57 a.m.
  1 message
• Secret fishing hole revealed -- Kevin French, Antrim, NH -- Monday, 28 January 2008, at 4:27 p.m.
  7 messages -- Newest posted Wednesday, 30 January 2008, at 10:54 p.m.
• Making boards from timber with hand tools -- MattL -- Monday, 28 January 2008, at 7:44 p.m.
  10 messages -- Newest posted Saturday, 2 February 2008, at 9:41 p.m.
• Plane Repair Question -- Tom MacGregor -- Tuesday, 29 January 2008, at 5:45 a.m.
  6 messages -- Newest posted Friday, 1 February 2008, at 4:26 a.m.
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 29 January 2008, at 7:25 a.m.
  1 message
• Return to service . . . *PIC* -- steve mackay -- Tuesday, 29 January 2008, at 11:26 a.m.
  16 messages -- Newest posted Thursday, 31 January 2008, at 1:53 p.m.
• Audels Carpenters and Builders Guide -- Mark Kuzee -- Tuesday, 29 January 2008, at 12:02 p.m.
  8 messages -- Newest posted Wednesday, 30 January 2008, at 8:37 a.m.
• Frank Miller Lumber Mill Tour Date! -- Jennifer@Indy.USA -- Tuesday, 29 January 2008, at 12:16 p.m.
  1 message
• Hey, Dave Mount *LINK* -- Todd O. Cronkhite Maine Native, Presently Away -- Tuesday, 29 January 2008, at 6:44 p.m.
  8 messages -- Newest posted Wednesday, 30 January 2008, at 5:35 p.m.
• Shop Art Suggestions? -- David Miller from Iowa -- Wednesday, 30 January 2008, at 3:19 p.m.
  10 messages -- Newest posted Saturday, 2 February 2008, at 10:08 a.m.
• Mutt planes . . . -- steve mackay -- Wednesday, 30 January 2008, at 8:10 p.m.
  3 messages -- Newest posted Wednesday, 30 January 2008, at 10:50 p.m.
• Sharpening Plane Irons -- Stephen Shepherd in the State of Deseret -- Thursday, 31 January 2008, at 7:39 a.m.
  16 messages -- Newest posted Thursday, 7 February 2008, at 10:26 a.m.
• Adjusting my expectation of perfection -- Stephen Kirk in Quakertown, PA -- Thursday, 31 January 2008, at 12:01 p.m.
  29 messages -- Newest posted Tuesday, 5 February 2008, at 1:08 p.m.
• Just plane cool - OT probably *LINK* *PIC* -- Mike Schwing from Maryland -- Thursday, 31 January 2008, at 5:44 p.m.
  2 messages -- Newest posted Friday, 1 February 2008, at 4:53 p.m.
• Mutt plane . . . *PIC* -- steve mackay -- Thursday, 31 January 2008, at 8:10 p.m.
  23 messages -- Newest posted Tuesday, 5 February 2008, at 8:36 a.m.
• Uses of edge-trimming block plane *LINK* -- Bill Houghton, Sebastopol, CA, rainin' again -- Thursday, 31 January 2008, at 9:28 p.m.
  3 messages -- Newest posted Friday, 1 February 2008, at 12:21 a.m.
• Daryl Weir -- John Hoffman -- Friday, 1 February 2008, at 7:51 a.m.
  30 messages -- Newest posted Monday, 11 February 2008, at 4:28 a.m.
• Mr. Hackett . . . -- steve mackay -- Friday, 1 February 2008, at 11:51 a.m.
  2 messages -- Newest posted Sunday, 3 February 2008, at 11:54 a.m.
• Am I missing something? *LINK* -- Bill Houghton, Sebastopol, CA, sunny so far! -- Friday, 1 February 2008, at 12:08 p.m.
  7 messages -- Newest posted Sunday, 3 February 2008, at 6:33 a.m.
• In praise of LV spokeshaves *PIC* -- Dave Mount -- Saturday, 2 February 2008, at 11:38 a.m.
  26 messages -- Newest posted Monday, 4 February 2008, at 7:55 a.m.
• Archive? -- Dave Mount -- Saturday, 2 February 2008, at 2:02 p.m.
  7 messages -- Newest posted Tuesday, 5 February 2008, at 12:42 p.m.
• Spokeshaves: Wooden v Metal -- Stephen Shepherd in the State of Deseret -- Saturday, 2 February 2008, at 7:00 p.m.
  35 messages -- Newest posted Thursday, 7 February 2008, at 4:41 a.m.
• jointer planes -- David -- Sunday, 3 February 2008, at 10:52 a.m.
  14 messages -- Newest posted Monday, 4 February 2008, at 10:45 p.m.
• LN Paring Chisels -- James Blandford-Baker -- Sunday, 3 February 2008, at 3:33 p.m.
  6 messages -- Newest posted Tuesday, 5 February 2008, at 8:17 p.m.
• Found an O101 in Recent Acquisitions *PIC* -- Gary K -- Monday, 4 February 2008, at 10:58 a.m.
  3 messages -- Newest posted Monday, 4 February 2008, at 1:44 p.m.
• Hatchets? -- Brad in Ottawa -- Monday, 4 February 2008, at 1:40 p.m.
  28 messages -- Newest posted Wednesday, 6 February 2008, at 5:01 p.m.
• What is an acute angle for a paring chisel? -- Doug Reynolds in Seattle -- Monday, 4 February 2008, at 3:18 p.m.
  5 messages -- Newest posted Thursday, 7 February 2008, at 3:11 a.m.
• Traditional building class *PIC* -- McKay -- Monday, 4 February 2008, at 6:36 p.m.
  3 messages -- Newest posted Tuesday, 5 February 2008, at 2:30 p.m.
• Using the Great Big Blade -- Stephen Shepherd in the State of Deseret -- Monday, 4 February 2008, at 10:27 p.m.
  15 messages -- Newest posted Wednesday, 6 February 2008, at 11:43 a.m.
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 5 February 2008, at 7:47 a.m.
  1 message
• Auriou coming back from the dead! *LINK* -- wilbur -- Tuesday, 5 February 2008, at 10:10 a.m.
  7 messages -- Newest posted Thursday, 7 February 2008, at 5:20 p.m.
• Lapping plane soles -- Martin -- Tuesday, 5 February 2008, at 1:25 p.m.
  6 messages -- Newest posted Wednesday, 6 February 2008, at 1:08 p.m.
• Cut dovetails with the biggest saw you can find -- Stephen Kirk in Quakertown, PA -- Tuesday, 5 February 2008, at 4:53 p.m.
  14 messages -- Newest posted Friday, 8 February 2008, at 12:22 p.m.
• John Deere green...check it out..!! *LINK* -- Marv -- Tuesday, 5 February 2008, at 6:29 p.m.
  3 messages -- Newest posted Thursday, 7 February 2008, at 1:37 p.m.
• What is this hammer *LINK* -- Todd O. Cronkhite Maine Native, Presently Away -- Tuesday, 5 February 2008, at 8:10 p.m.
  7 messages -- Newest posted Wednesday, 6 February 2008, at 4:29 p.m.
• I've got it bad, real bad - the collecting bug -- Mike Schwing from Md. -- Wednesday, 6 February 2008, at 8:40 a.m.
  10 messages -- Newest posted Friday, 8 February 2008, at 2:53 p.m.
• Age of Stanley #7 -- tek-Brunswick, Ohio -- Wednesday, 6 February 2008, at 4:50 p.m.
  3 messages -- Newest posted Wednesday, 6 February 2008, at 7:29 p.m.
• Totally OT (mostly) *LINK* -- Dan Donaldson -- Wednesday, 6 February 2008, at 9:44 p.m.
  5 messages -- Newest posted Thursday, 7 February 2008, at 2:47 p.m.
• Big Saws *PIC* -- Stephen Shepherd in the State of Deseret -- Wednesday, 6 February 2008, at 9:52 p.m.
  11 messages -- Newest posted Saturday, 9 February 2008, at 3:47 p.m.
• Pegged joints -- Denis Chénard, Orléans, Ont. -- Wednesday, 6 February 2008, at 10:05 p.m.
  8 messages -- Newest posted Friday, 8 February 2008, at 2:55 p.m.
• A Todd Hughes Hatchet 1of4 *PIC* -- Todd O. Cronkhite Maine Native, Presently Away -- Wednesday, 6 February 2008, at 10:41 p.m.
  10 messages -- Newest posted Thursday, 7 February 2008, at 3:22 p.m.
• Odd Stanley Block Plane 1 of 5 *PIC* -- charle belden -- Thursday, 7 February 2008, at 2:53 a.m.
  5 messages -- Newest posted Thursday, 7 February 2008, at 1:44 p.m.
• Odd Stanley Block Plane 2 of 5 *PIC* -- charle belden -- Thursday, 7 February 2008, at 2:54 a.m.
  1 message
• Odd Stanley Block Plane 3 of 5 *PIC* -- charle belden -- Thursday, 7 February 2008, at 2:55 a.m.
  1 message
• Odd Stanley Block Plane 4 of 5 *PIC* -- charle belden -- Thursday, 7 February 2008, at 2:57 a.m.
  1 message
• Odd Stanley Block Plane 5 of 5 *PIC* -- charle belden -- Thursday, 7 February 2008, at 2:59 a.m.
  4 messages -- Newest posted Thursday, 7 February 2008, at 11:23 a.m.
• Not for Beginners -- Stephen Shepherd in the State of Deseret -- Thursday, 7 February 2008, at 7:40 a.m.
  20 messages -- Newest posted Friday, 15 February 2008, at 2:15 p.m.
• Lie-nielsen show in Oakland Ca. *LINK* -- Eddie Pacheco; San Jose, Ca. -- Thursday, 7 February 2008, at 1:38 p.m.
  1 message
• Shameless Plug -- James Watriss -- Thursday, 7 February 2008, at 9:29 p.m.
  4 messages -- Newest posted Sunday, 10 February 2008, at 11:36 a.m.
• Question for wooden handscrew clamp fans *LINK* -- wilbur -- Friday, 8 February 2008, at 11:43 a.m.
  10 messages -- Newest posted Wednesday, 13 February 2008, at 11:05 a.m.
• how flat is flat enough -- RobRing -- Friday, 8 February 2008, at 6:23 p.m.
  38 messages -- Newest posted Sunday, 17 February 2008, at 5:16 a.m.
• Name this saw *PIC* -- David Miller from Iowa -- Saturday, 9 February 2008, at 9:32 a.m.
  8 messages -- Newest posted Monday, 11 February 2008, at 1:05 p.m.
• Are you tired of busting your nuts? *LINK* -- Alan DuBoff -- Saturday, 9 February 2008, at 4:58 p.m.
  42 messages -- Newest posted Tuesday, 12 February 2008, at 9:17 a.m.
• Garbage sale oddities *PIC* -- Bill Houghton, Sebastopol, CA, gloriously sunny -- Saturday, 9 February 2008, at 10:59 p.m.
  9 messages -- Newest posted Monday, 11 February 2008, at 8:52 p.m.
• Millers Falls -- tek-Brunswick, Ohio -- Sunday, 10 February 2008, at 9:25 a.m.
  3 messages -- Newest posted Monday, 11 February 2008, at 2:23 p.m.
• No 7 Bailey -- Tom Libby -- Sunday, 10 February 2008, at 11:46 a.m.
  4 messages -- Newest posted Monday, 11 February 2008, at 5:06 p.m.
• Sargent 710 Problem -- Mark in Texas -- Sunday, 10 February 2008, at 11:50 a.m.
  1 message
• Another Rookie discovery . . . -- steve mackay -- Sunday, 10 February 2008, at 4:59 p.m.
  3 messages -- Newest posted Monday, 11 February 2008, at 5:16 p.m.
• Flattening soles of wooden planes -- Mark Harrison -- Brisbane Australia -- Monday, 11 February 2008, at 6:22 a.m.
  11 messages -- Newest posted Tuesday, 12 February 2008, at 8:12 a.m.
• New Bench *PIC* -- Roderick Drumgoole -- Monday, 11 February 2008, at 2:54 p.m.
  39 messages -- Newest posted Tuesday, 12 February 2008, at 9:30 p.m.
• Wipe on poly gel -- Bob from GB -- Monday, 11 February 2008, at 4:20 p.m.
  1 message
• Here is one for you -- Stephen Shepherd in the State of Deseret -- Monday, 11 February 2008, at 5:44 p.m.
  2 messages -- Newest posted Monday, 11 February 2008, at 5:56 p.m.
• Speaking of Nuts -- Stephen Shepherd in the State of Deseret -- Monday, 11 February 2008, at 7:26 p.m.
  2 messages -- Newest posted Tuesday, 12 February 2008, at 1:18 a.m.
• Sand'n the sole . . . -- steve mackay -- Monday, 11 February 2008, at 8:07 p.m.
  3 messages -- Newest posted Monday, 11 February 2008, at 9:32 p.m.
• Oil for tools -- Scott Burr in somewhat warn Ben Lomond, CA -- Monday, 11 February 2008, at 8:55 p.m.
  27 messages -- Newest posted Friday, 15 February 2008, at 6:40 p.m.
• Shop built Marking knives and awls -- Dominic Greco in Richboro PA -- Monday, 11 February 2008, at 9:32 p.m.
  16 messages -- Newest posted Tuesday, 12 February 2008, at 7:49 p.m.
• Wood movement; Table and Bench tops. *PIC* -- James Watriss -- Monday, 11 February 2008, at 11:01 p.m.
  16 messages -- Newest posted Friday, 15 February 2008, at 9:41 p.m.
• Working with leather Qs -- Alan DuBoff -- Tuesday, 12 February 2008, at 1:01 a.m.
  102 messages -- Newest posted Sunday, 24 February 2008, at 9:21 a.m.
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 12 February 2008, at 7:32 a.m.
  1 message
• Five Barns 2008 -- Bill Grumbine (Kutztown PA) -- Tuesday, 12 February 2008, at 4:44 p.m.
  2 messages -- Newest posted Wednesday, 13 February 2008, at 3:40 a.m.
• Information on manual drill presses -- Stephen Kirk in Quakertown, PA -- Tuesday, 12 February 2008, at 5:20 p.m.
  4 messages -- Newest posted Wednesday, 13 February 2008, at 9:12 a.m.
• Bench Pictures for Roderick *PIC* -- Dan Donaldson -- Tuesday, 12 February 2008, at 7:58 p.m.
  18 messages -- Newest posted Wednesday, 13 February 2008, at 12:53 p.m.
• Shapton GlassStones Review -- Mark Harrison -- Brisbane Australia -- Tuesday, 12 February 2008, at 8:09 p.m.
  14 messages -- Newest posted Friday, 15 February 2008, at 2:18 p.m.
• sawmill creek site -- greg forster -- Tuesday, 12 February 2008, at 8:59 p.m.
  4 messages -- Newest posted Wednesday, 13 February 2008, at 9:47 a.m.
• Nicholson 50, 49, 48, 47.... ? -- Scott in Montana -- Tuesday, 12 February 2008, at 11:42 p.m.
  7 messages -- Newest posted Thursday, 14 February 2008, at 12:38 p.m.
• Puzzle Mallet -- Alan DuBoff -- Wednesday, 13 February 2008, at 6:40 a.m.
  3 messages -- Newest posted Wednesday, 13 February 2008, at 9:09 a.m.
• Old pictures *PIC* -- James Watriss -- Wednesday, 13 February 2008, at 2:00 p.m.
  17 messages -- Newest posted Friday, 15 February 2008, at 6:49 p.m.
• Clear finish that prevents wood darkening? -- Paul Erickson -- Wednesday, 13 February 2008, at 2:59 p.m.
  6 messages -- Newest posted Thursday, 14 February 2008, at 4:42 a.m.
• Finish for outside bench -- Wiley Horne -- So. Calif. -- Wednesday, 13 February 2008, at 8:06 p.m.
  19 messages -- Newest posted Friday, 15 February 2008, at 6:56 p.m.
• Wall mounted corner tool til? -- Paul Erickson -- Thursday, 14 February 2008, at 2:00 a.m.
  10 messages -- Newest posted Friday, 15 February 2008, at 6:45 a.m.
• File types -- Wayne Carson "TX" -- Thursday, 14 February 2008, at 10:51 a.m.
  13 messages -- Newest posted Friday, 15 February 2008, at 8:06 p.m.
• hand plane assembly - HELP! -- Rick Snyder -- Thursday, 14 February 2008, at 1:54 p.m.
  11 messages -- Newest posted Friday, 15 February 2008, at 10:32 a.m.
• plane assembly problem-- SOLVED! -- Rick Snyder -- Thursday, 14 February 2008, at 10:41 p.m.
  4 messages -- Newest posted Friday, 15 February 2008, at 11:52 p.m.
• Are the Sorby mortising chisels good -- Stephen Kirk in Quakertown, PA -- Friday, 15 February 2008, at 8:39 a.m.
  9 messages -- Newest posted Saturday, 16 February 2008, at 9:55 p.m.
• Arrangement of workbench and tool racks -- wilbur -- Friday, 15 February 2008, at 1:06 p.m.
  7 messages -- Newest posted Saturday, 16 February 2008, at 4:16 p.m.
• A good use for a hatchet if I ever saw one *NM* *PIC* -- James Watriss -- Friday, 15 February 2008, at 3:04 p.m.
  3 messages -- Newest posted Saturday, 16 February 2008, at 1:24 a.m.
• Anvil Anxiety -- David Miller from Iowa -- Friday, 15 February 2008, at 7:21 p.m.
  45 messages -- Newest posted Thursday, 21 February 2008, at 1:15 p.m.
• angled or splayed dovetails -- chichi -- Friday, 15 February 2008, at 9:32 p.m.
  5 messages -- Newest posted Saturday, 16 February 2008, at 12:44 p.m.
• panel angle? -- Bill Tindall, E.TN -- Saturday, 16 February 2008, at 7:08 a.m.
  7 messages -- Newest posted Sunday, 17 February 2008, at 10:11 a.m.
• Forked Turn Screw *PIC* -- Stephen Shepherd in the State of Deseret -- Saturday, 16 February 2008, at 2:16 p.m.
  16 messages -- Newest posted Sunday, 17 February 2008, at 12:53 a.m.
• what exactly is jappaning? -- Jim -- Sunday, 17 February 2008, at 12:18 p.m.
  6 messages -- Newest posted Sunday, 17 February 2008, at 9:25 p.m.
• What is this thing? Pic 1 of 3 *PIC* -- David Miller from Iowa -- Sunday, 17 February 2008, at 2:46 p.m.
  13 messages -- Newest posted Monday, 18 February 2008, at 7:53 p.m.
• WARNING!!! *LINK* -- Stephen Shepherd in the State of Deseret -- Sunday, 17 February 2008, at 6:40 p.m.
  30 messages -- Newest posted Tuesday, 19 February 2008, at 11:06 a.m.
• Sharpening Handsaws? -- Charles Jackson III -- Sunday, 17 February 2008, at 8:03 p.m.
  18 messages -- Newest posted Monday, 25 February 2008, at 4:37 a.m.
• Rasps -- wilbur -- Sunday, 17 February 2008, at 8:51 p.m.
  12 messages -- Newest posted Tuesday, 19 February 2008, at 8:42 p.m.
• Saw Sharpening Lamp? -- Tony - Memphis -- Monday, 18 February 2008, at 12:26 p.m.
  14 messages -- Newest posted Wednesday, 20 February 2008, at 2:36 a.m.
• Danish Oil and Cure Time - Safety Question -- Brad in Ottawa -- Monday, 18 February 2008, at 3:36 p.m.
  7 messages -- Newest posted Tuesday, 19 February 2008, at 8:25 p.m.
• Free to a good home....PIX -- Rob Brophy...lost in Niagara -- Monday, 18 February 2008, at 3:47 p.m.
  26 messages -- Newest posted Thursday, 21 February 2008, at 3:29 p.m.
• Digital camera recommendations--OT -- Wiley Horne -- So. Calif. -- Monday, 18 February 2008, at 4:11 p.m.
  22 messages -- Newest posted Wednesday, 20 February 2008, at 12:32 a.m.
• What kind of saw made these marks? *PIC* -- Stephen Shepherd in the State of Deseret -- Monday, 18 February 2008, at 7:14 p.m.
  13 messages -- Newest posted Wednesday, 20 February 2008, at 10:23 a.m.
• Sheppach sharpener -- john lucas -- Monday, 18 February 2008, at 9:04 p.m.
  4 messages -- Newest posted Tuesday, 19 February 2008, at 9:54 a.m.
• aromatic cedar properties -- Jack Guzman from Maine -- Monday, 18 February 2008, at 9:12 p.m.
  9 messages -- Newest posted Tuesday, 19 February 2008, at 1:36 p.m.
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 19 February 2008, at 7:12 a.m.
  1 message
• shoulder planes -- John H. in Baltimore -- Tuesday, 19 February 2008, at 10:07 a.m.
  12 messages -- Newest posted Thursday, 21 February 2008, at 8:22 a.m.
• Milwaukee MWTCA Show -- Slav Jelesijevich -- Tuesday, 19 February 2008, at 5:54 p.m.
  2 messages -- Newest posted Wednesday, 20 February 2008, at 6:34 p.m.
• Bench Lathe *PIC* -- Stephen Shepherd in the State of Deseret -- Tuesday, 19 February 2008, at 6:39 p.m.
  2 messages -- Newest posted Wednesday, 20 February 2008, at 2:05 p.m.
• A restored Stanley #45 Combo Plane -- Dominic Greco in Richboro PA -- Tuesday, 19 February 2008, at 10:53 p.m.
  25 messages -- Newest posted Tuesday, 26 February 2008, at 6:15 p.m.
• LN chisel handles fall off...a DOH moment -- Jack Guzman from Maine -- Wednesday, 20 February 2008, at 10:24 a.m.
  14 messages -- Newest posted Monday, 25 February 2008, at 1:42 p.m.
• New hat colors for spring! *LINK* *PIC* -- Ellis Walentine -- Wednesday, 20 February 2008, at 11:27 a.m.
  5 messages -- Newest posted Friday, 22 February 2008, at 2:10 a.m.
• New Tool Club Northern IL/Milwakee and Greenbay -- Slav Jelesijevich -- Wednesday, 20 February 2008, at 6:46 p.m.
  2 messages -- Newest posted Thursday, 21 February 2008, at 12:44 a.m.
• More anvil stuff *PIC* -- David Miller from Iowa -- Thursday, 21 February 2008, at 8:39 a.m.
  3 messages -- Newest posted Thursday, 21 February 2008, at 4:07 p.m.
• Ballpark on a set of hollows/rounds? *PIC* -- Mike Schwing from Md. -- Thursday, 21 February 2008, at 11:09 a.m.
  5 messages -- Newest posted Thursday, 21 February 2008, at 12:40 p.m.
• Parallel vs. Tapered Single Irons in Wooden Planes -- A. Sender -- Thursday, 21 February 2008, at 6:37 p.m.
  14 messages -- Newest posted Tuesday, 26 February 2008, at 3:17 p.m.
• How would you do this? *PIC* -- Jack Guzman from Maine -- Thursday, 21 February 2008, at 6:42 p.m.
  19 messages -- Newest posted Friday, 29 February 2008, at 7:10 p.m.
• OT, I am appalled... *PIC* -- Stephen Shepherd in the State of Deseret -- Thursday, 21 February 2008, at 7:22 p.m.
  9 messages -- Newest posted Saturday, 23 February 2008, at 9:52 a.m.
• Wooden molding planes *PIC* -- TiO -- Friday, 22 February 2008, at 9:06 a.m.
  6 messages -- Newest posted Friday, 22 February 2008, at 3:07 p.m.
• Veritas dovetail saw guide -- Bill Leffingwell -- Friday, 22 February 2008, at 9:59 a.m.
  14 messages -- Newest posted Sunday, 24 February 2008, at 10:43 a.m.
• First one of these I have ever had to make *PIC* -- Stephen Shepherd in the State of Deseret -- Friday, 22 February 2008, at 10:11 p.m.
  16 messages -- Newest posted Monday, 25 February 2008, at 12:10 a.m.
• floor jack -- McKay -- Saturday, 23 February 2008, at 7:46 p.m.
  3 messages -- Newest posted Sunday, 24 February 2008, at 8:36 a.m.
• Why o' why did I listern to the weather man... -- Scott Burr in wet windy & cold Ben Lomond, CA -- Sunday, 24 February 2008, at 6:17 p.m.
  10 messages -- Newest posted Tuesday, 26 February 2008, at 12:40 a.m.
• Finger planes . . . -- steve mackay -- Sunday, 24 February 2008, at 9:52 p.m.
  9 messages -- Newest posted Wednesday, 27 February 2008, at 11:26 a.m.
• Deneb Puchalski - LN Toolworks on sharpening! -- Alan DuBoff -- Monday, 25 February 2008, at 6:41 a.m.
  12 messages -- Newest posted Wednesday, 27 February 2008, at 5:06 a.m.
• NEW Shop Shots -- David Yoho -- Monday, 25 February 2008, at 9:17 a.m.
  1 message
• Studley on DIY -- Robert Henderson -- Monday, 25 February 2008, at 10:21 a.m.
  4 messages -- Newest posted Monday, 25 February 2008, at 9:12 p.m.
• Tool Refinishing -- David Miller from Iowa -- Monday, 25 February 2008, at 1:07 p.m.
  8 messages -- Newest posted Tuesday, 26 February 2008, at 9:19 p.m.
• Dovetail layout tricks? -- Tony - Memphis -- Monday, 25 February 2008, at 2:51 p.m.
  16 messages -- Newest posted Wednesday, 27 February 2008, at 5:17 a.m.
• Hand Tools Contest *LINK* -- Brad in Ottawa -- Monday, 25 February 2008, at 4:09 p.m.
  4 messages -- Newest posted Tuesday, 26 February 2008, at 7:41 a.m.
• Wall mounted corner tool til - proof of concept *PIC* -- Paul Erickson -- Monday, 25 February 2008, at 11:59 p.m.
  19 messages -- Newest posted Wednesday, 27 February 2008, at 11:02 p.m.
• stopping 2 drawers being extended at once -- Ian (in Sydney, Australia) -- Tuesday, 26 February 2008, at 7:40 a.m.
  5 messages -- Newest posted Wednesday, 5 March 2008, at 1:46 p.m.
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 26 February 2008, at 8:47 a.m.
  1 message
• Made me some marking knives *PIC* -- Rich Glisson -- Tuesday, 26 February 2008, at 4:15 p.m.
  11 messages -- Newest posted Wednesday, 27 February 2008, at 11:04 p.m.
• Rob Lee: What does '08 Hold for New Tools -- Tom Colligan -- Tuesday, 26 February 2008, at 9:12 p.m.
  11 messages -- Newest posted Saturday, 1 March 2008, at 10:14 p.m.
• MWTCA Spencer Ind March 1 & 2 -- Slav Jelesijevich -- Wednesday, 27 February 2008, at 12:38 a.m.
  1 message
• Strad violin makers planes *PIC* -- Dean Lapinel -- Wednesday, 27 February 2008, at 12:54 a.m.
  66 messages -- Newest posted Friday, 14 March 2008, at 7:39 p.m.
• PATINA -- Joe Rogers, Northern Virginia -- Thursday, 28 February 2008, at 8:27 a.m.
  2 messages -- Newest posted Thursday, 28 February 2008, at 7:52 p.m.
• Unfinished planes -- Jim in Burlington On -- Thursday, 28 February 2008, at 9:01 p.m.
  18 messages -- Newest posted Saturday, 1 March 2008, at 10:45 p.m.
• Moses, Care to Expound? -- Todd O. Cronkhite Maine Native, Presently Away -- Friday, 29 February 2008, at 10:37 a.m.
  22 messages -- Newest posted Sunday, 2 March 2008, at 6:00 p.m.
• Scaremongering again... -- Rob Lee -- Friday, 29 February 2008, at 10:42 a.m.
  26 messages -- Newest posted Sunday, 2 March 2008, at 11:43 p.m.
• Blog is up *LINK* -- Roy Anderson -- Friday, 29 February 2008, at 10:14 p.m.
  1 message
• Saw Jointer Files -- David Miller from Iowa -- Saturday, 1 March 2008, at 7:49 a.m.
  4 messages -- Newest posted Saturday, 1 March 2008, at 2:03 p.m.
• Head scratcher -- Edward in Vancouver -- Saturday, 1 March 2008, at 2:35 p.m.
  25 messages -- Newest posted Tuesday, 4 March 2008, at 4:02 p.m.
• "Andy" small router plane -- Bill Houghton, Sebastopol, CA -- Saturday, 1 March 2008, at 4:11 p.m.
  8 messages -- Newest posted Tuesday, 4 March 2008, at 4:23 a.m.
• Touch Mark *PIC* -- Stephen Shepherd in the State of Deseret -- Saturday, 1 March 2008, at 4:47 p.m.
  11 messages -- Newest posted Tuesday, 4 March 2008, at 11:57 a.m.
• Here is another one I can't make out *PIC* -- Stephen Shepherd in the State of Deseret -- Saturday, 1 March 2008, at 5:40 p.m.
  3 messages -- Newest posted Sunday, 2 March 2008, at 6:08 p.m.
• Tool ID? *PIC* -- David Miller from Iowa -- Saturday, 1 March 2008, at 5:49 p.m.
  13 messages -- Newest posted Monday, 3 March 2008, at 10:56 a.m.
• Wenzloff halfback saw -- Derek Cohen (in Perth, Australia) -- Sunday, 2 March 2008, at 7:24 a.m.
  13 messages -- Newest posted Tuesday, 4 March 2008, at 12:59 a.m.
• Stanley #51/52 re-japanned -- Derek Cohen (in Perth, Australia) -- Sunday, 2 March 2008, at 8:38 a.m.
  11 messages -- Newest posted Wednesday, 5 March 2008, at 12:36 p.m.
• Rubberized abrasives for sharpening -- Dave Mount -- Sunday, 2 March 2008, at 10:21 a.m.
  4 messages -- Newest posted Monday, 3 March 2008, at 3:51 p.m.
• Comparison/review of Herrli and Williams H&R DVDs -- Dave Mount -- Sunday, 2 March 2008, at 11:42 a.m.
  15 messages -- Newest posted Tuesday, 11 March 2008, at 1:37 p.m.
• Easily Amused *PIC* -- Stephen Shep